where Cisco TelePresence SX20 register the name of the video terminal that would have seen him other videoconference participants? Now displays IP-address
where Cisco TelePresence SX20 register the name of the video terminal that would have seen him other videoconference participants? Now displays IP-address
Hello!Our company currently uses a Cisco ASA 5510 and we have two internet connections working solid -- one (cable) as primary, one (DSL) as backup. We also have a third internet connection that is dedicated to our SIP phones. Currently we host our...
Hi I am currently on version 2.0 of prime and wish to downgrade to 1.3 then upgrade to version 1.4.2 is this possible? Thank you
Hi All,I am looking for some help with the following problem. I have a client that I am trying to set up a S2S VPN with but have run into an issue with over lapping networksI am setting it up from my DMZ to their local network but the trouble is thei...
Hi all, I need a router up to 500 Mb thorughput, it should support 4000 users connecting to internet and should have four Gigabit Ethernet ports. I will have two ISP links (150 and 250 Mb) and use BGP. I've been thinking on the ASR series, but I'd li...
Can i use my wan interface ip as the netflow source ???
hi All, Last year we purchased a series of 3750X switches, but at the time didn't realize that the spare power supplies that were ordered were DC instead of AC. I can't replace them at the moment, and I do not have a DC source to supply power to them...
Hi Sir/Ma'am, Hope someone can help me... My problem is that I added new ip block to my bgp to advertise. I have to cisco routers by the way... Both have same configuration but the other one is not advertising my newly added ip block...I did use "pre...
I've been fighting with auto smart port detection macros for a while now and they just don't seem to work. Is this just a broken technology, or am I doing something wrong?We have Panasonic VoIP phones that detect correctly by MAC address, but won't g...
Dear sir, Would you advice is Cisco Nexus 3548 switch supports vPC feature ?? and is Cisco NX-OS Release 6.0(2)A1(1d) support this feature too?? or shall i need to upgrade to new version??
Hi Anyone,Can anyone please advise if implementing Root Guard on the Root Bridge will cause a STP Topology Change, thus effectively causing a LAN outage because STP reconvergence is required? I need to know this fact so I can decide to implement Root...
Dear Friends, policy map enabled as below , need to drop packets above 1024 ( 1MBPS ) , suggest better commands to implement the same ( consider it is a video streaming traffic ) policy-map outbound-policy2 class uniqos2 bandwidth 1024service-policy...
I understand "show version" show the amount of time since last reboot, but I would like to find the total number of hours a device has been turned on from the initial purchase date.
Hi there, i know that a protected port doesnt talk to a protected.An unprotected talks to an unprotected.A protected talks to an unprotected.What I don;t know is if an unprotected talks to a protected. Thanks in advance
We're looking at moving towards using the ie2000 or the ie2000U within our organization. Based on the information that I've read, it appears that the ie2000 is superior in it's industrial compliance compared to the ie2000U. However, the advanced QOS ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-04-2024 03:22 AM | ||
05-29-2024 04:52 AM | ||
02-14-2024 04:00 AM | ||
11-10-2023 09:28 AM | ||
11-09-2023 09:30 AM |