03-13-2006 10:08 AM - edited 03-03-2019 02:15 AM
Sorry but I've looked and didn't see this question posted...Has anyone every NATed using a 3750 sw rel WS-C3750G-24TS 12.2(25)SEB4 C3750-IPBASE-M? I can do a sh ip nat trans or stat but trying to configure I thought it was just ip nat in global config but that didn't seem to work. Any suggestions?
Solved! Go to Solution.
03-13-2006 10:54 AM
Hi,
NAT is not supported on the 3750 platform. The "show ip nat translation" and "show ip nat statistics" is in the CLI, but unsupported.
This is documented here:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12225see/scg/swuncli.htm#wp1031988
HTH,
Bobby
*Please rate helpful posts
03-13-2006 10:54 AM
Hi,
NAT is not supported on the 3750 platform. The "show ip nat translation" and "show ip nat statistics" is in the CLI, but unsupported.
This is documented here:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12225see/scg/swuncli.htm#wp1031988
HTH,
Bobby
*Please rate helpful posts
03-13-2006 12:49 PM
Hi Bobby;
Thanks for the info
ThANKS
war
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide