I had a 6509 switch recycled power to its 6748-GE-TX module. I like to understand why this module reset caused the system to restart, and what this "system restart" means. Please see the syslog messages (I didn't include all messages).ThanksGary-----...
This is a bit hairy, so excuse my detailed explanation as if I were speaking to a child....One of my customer's has a remote site in Canada on 256/64k Frame-Relay. They need at least 512k for bandwidth picky applications and have a scheduled plan fo...
hi matesneed some advices about the best test method for below system:I have a physical network line between two computers which consists of fiber optic cable, media converters and utp cables. Nontheless end of the lines are regular RJ45 connectors. ...
The following configuration is possible?. DLSW between a 802.1q subinterface and an Ethernet interface. Thanksinterface FastEthernet0/0.1 encapsulation dot1Q 300 ip address x.x.x.x x.x.x.x no ip redirects ip nat outside bridge-group 1dlsw local-peer...
if im hosting a server, do I just need an access list allowing port 80 inbound to the web server ip address, also for users browsing the internet, what access list do i need inbound wise ?
About 8 months ago I upgraded a bunch of our 2950's to 12.1(22)EA4 and ran into performance problems. I was losing telnet/ping connectivity to the switches and users who were connected to them reported performance problems. I opened a TAC call and wa...
Hi, We are having 7912 Ip Phones connected to WS-X6148A-GE-45AF modules in 6500 switch. If we leave the Port duplex and speed to auto or force it to 100 full in switch side we are getting lot of runts and undersize errors.Due to this voice quality of...
Hello experts,When I do the show command - sh int f0/0 | i ignore, I can see a large number of ignored packets. The inbound and outbound traffic is about 40-50% for this interface. Why there are still so many "ignores". This router is part of the liv...
Is it possible for me to say route the 10.0.0.0/8 network through one router and push any 10.0.0.0/8 mail traffic through another router ? and if so how would this be achieved ?
