Recently our ISP switched our plan from a statically assigned IP to DHCP (that renews the same address). I'm not a CCNA, but the PIX 506 we have was relatively easy to setup. Now that the outside address has to be grabbed from DHCP I'm having probl...
I seem to remember reading somewhere where SYSlog and PDM couldn't be run on the PIX at the same time.....is this still true? I would like to use PDM but I also need the PIX to write to the syslog server.Dave
We have an intermittent issues with a PIX515, which until recently has been running fine on 6.0.1 software.What seems to happen is:- Total lose of packet routing through the PIX- Total lose of access to the CLI- Current FIX is power cycle the unitWha...
Does CISCO products employ stateful firewall technology? Is there any reference model of that technology? It is said Stateful Firewall is as secure as proxy firewall, how can compare them, I mean quantitively?thxDong
Hi,some weeks ago I worked with a 4230 sensor and a CSPM 2.3.3 (i), now I'm working with the same CSPM and a new 4210 sensor. In the first case and in the second I've experimented the same problem:some event signature are found but not showed in the ...
Dear all,I get the following message on VPN3000`s log when trying to download a file from a FTP server inside of the protected network :"Error 0x2003 when getting file information"The VPN3000`s version is 3.0.3.I tried bug tools kit, and get some FTP...
I have 2 pixfirewalls that I am trying to enroll with private Microsoft CA. One PIX 515 an the headend and a PIX 501 at a home office. Both are running 6.2(1)code. The problem is that after I receive a valid cert everything works great until I rebo...
I have a customer repeatedly triggering 6302 Modified Loki while monitoring his server at our facility from his remote location. He claims he is using only IPSentry and a standard ICMP ping to do his monitoring. This would appear completely unrelat...
Hi,Whenever a client would do a trace from their network to one of their server colocated to our network, an asterisk would appear just when the IP of that server should appear. Those servers are all behind Pix535. Obviously the Pix blocks such req...
When starting up desktop w/vpn client (3.5) installed I recieve the following:'System error unable to retrieve connection status'.How do I stop the client from tring to retrieve this status at startup.
Hi,Does anobody as laready suceed in configuring the NTP daemon on the 4230. I would like to synchronise whith my whole network and have accurate event logging.thanks
- I'm not sure about "Unique" field in SWEEP.PORT.TCP engine. Is it right when I say that Unique is used to specified the maximum connections to ONE port of a host.- Does the signature fires when the result of masking the packet tcpflag (that sensor ...
I would like to congfigure the Unix Director to email to my mailbox the alarm details. Although I went through the Configuration Guide many times, I failed.Here are the steps that I did. Can you please tell me where I am wrong?1. Configuring sendmail...
