Other Security Subjects

What's the point of the FIXUP statement? Is this the protocols allowed through the PIX? I have the default ones in place, but I can still TELNET through. Why?Also:The reason I'm asking is that I need to do an ANY rule (Check Point termingology) th...

On a Catalyst 2948G, software version NmpSW: 5.4(3), when should the set feature mdg be enabled? Other than pinging its default gateway(s) every ten seconds to verify that they are available, what else does enabling multiple default gateways do for ...

I have been implementing some VPN solutions based on PIX 515 in HQ and VPN Client (IPSec) on remote laptops. Since the VPN Client does not run on Win2000, I used PPTP (also Terminated on the Pix) with User-authentication done via ACS 2.5.Unfortenatel...

I am currently working on a solution that will enable users on my network to connect to our customers' secure networks utilizing Dial-on-Demand Routing. In order to keep our phone bills down I'd like to have something in place that can notify me whe...

I have several MFSC2 in several CAT6509. When I do "sh ip os nei" I get:either Full and DR or BDR or DROTHER, BUT also get Full and EXSTART on EOBC0/6.Debuging gives me the following message:6d04h: OSPF: Retransmitting DBD to 10.200.1.7 on EOBC0/66d0...

I lock access-list to my DNS server, when permiting only port 53 (udp, tcp).bat the ftp port is became accessible when www it's not.what is the problem in ftp access ans access-list

Is there any way in the PIX to prevent PINGing of the outside interface? I'd still like my internal users to be able to PING things on the Net, but I don't want outside users to be able to PING the outside interface or any internal users.ThanksDave

HelloI am an ISPI use nat in cisco routers.my DNS server have private addresse (192.168.0.1)il have ip nat static addresse for translation (193.41.164.1).I have a Mail server IL (192.168.0.6)IG (193.41.146.6)my question is : if some one in the intern...

I have used other vendor's IPSEC solutions in the past, and I am now considering using the Cisco 3015 VPN solution for end users. Does the Cisco client provide any security on the client machine so as to prevent back-door connections through end use...

is embedded security realy hot? I mean using dsp processor to implement the various security algorithms instead of the usual software implementation? Will embedded security become a neccessity in all VPNs and wireless networks?

Almost on topic- I have looked at the eval of CSPM, but had to run on Win2k for various reasons, NT is rec. platform, I didnt get to try the CSIDS integration. Has anyone used this combo? Does CSPM replace HPOVNNM? Do the auto hardening (feedback to ...

Well i needed some urgent help regarding this new sup IIG with RSFC(route switch feature card) i bought to do the intervlan routing b/w my 4-5 vlans. I previously or u say currently have a 4500 router to do intervlan routing. I wanted to know that th...

i am an MCA guy and i want to have my career in networking. where should i start and what the certification should i go for ie either ccna or ccda.please can anybody guide me in this aspect.

I cannot copy a new flash image to one of my 2900XL switches. I am being returned the 'not enough flash remaining'. This is the dir flash command from the switch:2-r--1109398 Mar 01 1993 02:03:07 c2900old.bin3-r-- 310 Mar 01 1993 02:04:36 ...

the router connected to my isp was probleme (it stop or reload itself)in sh context :System was restarted by bus error at PC 0x60993B90, address 0xD7F98696 at 15:45:52 UTC Sun Feb 4 20013600 Software (C3640-IO3-M), Version 12.1(5)T, RELEASE SOFTWARE...