Not gonna lie.... The complexity could have been avoided by just accepting OpenSSL generated key pairs... ¯\_(ツ)_/¯https://community.cisco.com/t5/other-security-subjects/nge-ios-ecc-key-pair-import-issue/td-p/3039145 Haven't played with libest yet bu...
Forum Posts
Hi all,I've checked and double-checked everything. This is a duplicate (ip and ACLs changed to protect the innocent) of another situation which works fine. But this one does not. I can't get any debug info on the 2821 side (?) but right-now I'm conce...
[119:4:1] http_inspect: BARE BYTE UNICODE ENCODING [Impact: Potentially Vulnerable] From "GWxxxxxX " SERVER at Tue May 18 18:45:25 2021 UTC [Classification: Not Suspicious Traffic] [Priority: 3] {tcp} 10.12.3.78:56181 (unknown)->10.12.19.20:80 (unkn...
I have a pair of Cisco 6500 running in VSS. There are many SVIs configured and they can all talk with each other without any restriction. I have a need to restrict 1 VLAN from being able to talk with other VLANs and vice versa, while still allow some...
routingHello,For some reason I am not able to each peer's IP, though port channel and their subs are up. Arista [eth5]====[gi4]Cisco CSR ping 10.248.100.5Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 10.248.100.5, timeout is 2 secon...
Sorry if this is the wrong place for this question I didnt see anywhere that fit perfectly. I'm looking for a Letter of Volatility for the Cisco Catalyst 3850 switch, does Cisco provide LOVs for their hardware? If so are they available for download...
Resolved! MACsec on Catalyst 9300
Hi, I have read the follwoing in Cisco Security Config guide regarding MACsec on the Catalyst 9300 (IOS XE 17.3.x): MACsec is not supported on Locator ID Separation Protocol (LISP) interfaces and Cisco Software-Defined Access (SD-Access) solution.wh...
Hi, if my VPN connected, i dont have access to my Router (192.168.178.1). I use Version 4.9.06037 for AnyConnect Client. Can you help me please to access to my Router? Thanks in Advance A.H.
Resolved! Basic ACL Question
Hello everyone, I have an ACL question. Let's say in a given topology I have the following networks. My goal is i want to prevent telnet traffic to 192.168.3.0/24 network but allow http traffic I'd put an ACL on the following interface R4 e0/0 such a...
Hello,I am writing to you because I notice that the Cisco Jabber application is not ...My problem is the following:The user is using cisco jabber on his workstation. By it happens that this has to connect on a new station and so connect to Jabber.The...
Hi all,My cisco router RV435 in the “TCP/IP Services” tab is listing below “Established Connection Status” unidentified connections from the WAN1 IP, to the following IPs:172.105.222.13813.226.52.2263.92.253.107compute-1.amazonaws.com13. cloudfront.n...
Hello All, We are in the process of evaluating Cisco ISE as our AAA Server. Our IA Department is wanting to know what Web Server (Apachee...???) or Services or Application Server does Cisco ISE use? The information is not jumping out at us. Any info...
Resolved! CISCO ASA IKEv1 upgrade
Good evening to you allone question for you i don't know how to respond.. i have a cisco ASA (don't know more than this at the moment ) as per the picture attachedi would like to understand if possible to upgrade this ASA from IKEv1 to IKEv2 and if y...
Hi,Only to know if amp for endpoint is compatible with oracle linux 7
Hi! There's a way to know about the time by defult of keepalive in TCP sessions on the ASA?? Maybe some command to see this information which indicates that the firewall does not make any action for closes the established TCP connections?????
