Other Security Subjects

I'm having a nasty problem with the Update 1. After installation of Update 1, it removes most of the subfolders under the VPN Security/Management Solution -> Administation drawer. The only subfolder that remains is Management Center. Sub-folders that...

Dear AllLet me explain my network First.I have a 64 kbps leased line connected to 1605R running firewall image.1605R is in turn connected to PIX 515E outside interface and Inside interface of PIX goes to ISA server which is acting as a firewall/proxy...

Hello - I am presently installing a new IDS4215 Sensor and the default password does not work, could someone tell me how i can reset the default password.Or tell me were i can find the proper step-by-step documentation showing how to do it.I'm runing...

Dear The Expert,I am very new with this and I hope someone can help me to solve my problem, why my ftp site can not being accessed by everybody in the world? .. I have configured my PIX 515:access-list inbound_filter permit tcp any host 202.152.40.40...

We can access IDS by Telnet and it is working fine but why we are unable to access IDS by direct console.Moreover, same console and serial connectors are try one more IDS, its working fine. What would be the main reason ?

"Add the host to the systems trusted TLS certificates" Using IDSMDC 1.2.3.Ron.

Can the 3002 establish a lan 2 lan connection to a 3000 concentrator? I can get Phase 1 completed but Phase 2 does start. What I am doing wrong?

I have installed a new cisco works IDS MC. Installed the VMS updates and running 1.2.3 on the IDS MC. I upgraded the SP version of the MC to IDS-K9-sp-4.1-4-s91.zip. I downloaded IDS-sig-4.1-4-S100.zip (same sig version as sensor). I go to the up...

Having problems with setting up FTPs (FTP over SSL/TLS) on PIX. The client successfully performs the initial authentication using port 990 (control channel for FTPs) but the connection timesout after that. Tried without pix & it works fine - so PIX i...

Just wondering if anyone is using this? I have installed this onto a 3662 router. In the lab it works well against attacks, such as syn-floods etc. These attacks come from the outside, while I present nothing to the outside and are stopped.(Ex. a web...

Hello,I need some help configuring a shared security context on the fwsm.config 6509:firewall module 9 vlan-group 100,999firewall vlan-group 100 100-113firewall vlan-group 999 998,999int vlan 100 ip address 172.31.0.10 255.255.255.0 standby 1 ip 172....