Someone marked this “SOLVED” !?!
This is NOT solved. Its so frustrating and down right embarrassing (for me with the client, but should be embarrasing much more for CISCO the biggest name in networking to not see this issue in QA (yet again) with this device. As it seems very common and almost 100% likely to occur.
Such a shame when yet again, a very capable and very solid cost effective hardware is bogged down with and overshadowed by silly missed/new bugs seemingly EVERY firmware upgrade/version since 1.0.0.2.15 / 1.0.0.2.16 (gui breaks, vlan 1 device admin breaks!, “firmware update available” pop up every login even tho u already upgraded, router freezes/locks up due to no memory every 2-4 weeks (during biz hours had to reboot to clear), tunnel issues, etc)
such giood fast hardware too please clean up the software QA and testing guys
RV340 was working FINE, I only upgraded to patch vulnerabilities! And now I have no idea the status of my router/firewall LAN uplinks !?! And for all I know there is no traffic passing thru these ports So I was much better off not addressing vulnerabilities and having basic visibility I can trust on my LAN ports/uplinks
Simply “upgraded” (oxymoron) my RV340 from 1.0.3.20 to 1.0.3.21
** same issue on another device that was running 1.0.3.19 to 1.0.3.21)**
please fix this asap. It pains me to write these posts as much as it does to support these products over the last 5+ years (20+ years with cisco gear) and still seeing such ugly issues during basic maintenance patching. I am a huge cisco supporter and as much a cisco small biz gear fan but I cant keep dealing with this sort of issue with my livelihood and my clients libelihoods on the line. Its just not acceptable. Bugs are a thing, but vlans blocking traffic, ports showing as down, etc after minor step firmware uogrades are hard to ignore and harder to sleep at night…:(
