cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
252
Views
0
Helpful
1
Replies
Highlighted
Beginner

Autonomous to LWAP

Dear Gents

I'm using WLC 5508 software ver: 7.4.110.0, would like to convert below automous AP to LWAP. I'm not sure this model of AP support

WLC 7.4 code. Kindly advise any possibilites to get it work with WLC.

AIR-SAP1602I-E-K9

AIR-AP1142N-E-K9

AIR-AP1230B-E-K9

Thanks..

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

the 1230 is the only one that won't work

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn74.html#wp1048617

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered

View solution in original post

1 REPLY 1
Highlighted

the 1230 is the only one that won't work

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn74.html#wp1048617

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered

View solution in original post