10-24-2013 10:18 AM - edited 07-04-2021 01:09 AM
Dear Gents
I'm using WLC 5508 software ver: 7.4.110.0, would like to convert below automous AP to LWAP. I'm not sure this model of AP support
WLC 7.4 code. Kindly advise any possibilites to get it work with WLC.
AIR-SAP1602I-E-K9
AIR-AP1142N-E-K9
AIR-AP1230B-E-K9
Thanks..
Solved! Go to Solution.
10-24-2013 10:26 AM
the 1230 is the only one that won't work
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn74.html#wp1048617
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
10-24-2013 10:26 AM
the 1230 is the only one that won't work
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn74.html#wp1048617
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide