05-28-2019 01:02 PM - edited 07-05-2021 10:28 AM
Good day,
I have a wireless phone 7921, trying to connect it to an autonomous AP 1131.
I tried configuring both WPA and WPA with TKIP and AES, and it does not associate, it is not even showing as an authentication failed, it seems that it is not even negotiating.
When I left the network opened, with no security, it associated without a problem.
Is there any special configuration needed or do you have any recommendation?
Thanks
05-28-2019 05:25 PM
What version of software your running on it ? Pls share your config to have a look
Rasika
05-28-2019 06:38 PM
05-28-2019 10:32 PM - edited 05-28-2019 10:32 PM
Hi,
Is it possible to make that Voice SSID to run WPAv2 & advertise only on 5GHz (radio 1, currently it is shutdown) to test ?
dot11 ssid <ssid_name>
authentication open
authentication key-management wpa version 2
!
interface Dot11Radio1
encryption vlan X mode ciphers aes-ccm
HTH
Rasika
*** Pls rate all useful responses ***
05-29-2019 07:47 AM
05-28-2019 05:49 PM
Hi,
What is your AP configuration for the SSID?
Thanks
John
05-28-2019 06:40 PM
05-28-2019 11:51 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide