01-08-2015 12:18 AM - edited 03-01-2019 11:58 AM
I've got a C220 M3 and I'm trying to add an Intel I350T quad port NIC to the server.
If I just plug in the NIC into the second PCIe slot, the server doesn't complete POST - it hangs after displaying the messages from the onboard NICs. (The server has two CPUs so I can use this second slot)
If I remove the RAID card from slot 1 and put the NIC into slot 1, the server does complete POST and I see all six network ports during the server POST.
What do I need to do for the server to accept this NIC in slot 2?
GTG