Hello all Recently I'm seeing an unusual issue when attempting to run any queries through the Software Suggestion API. My API login is successful, but it seems that any valid PID provided hits an error. The response I get is 500 INTERNAL_SERVER_ERR...
Forum Posts
Hello Cisco DevNet Team,I am encountering an issue with the Cisco Software Suggestion API V2 when retrieving recommended software versions for certain devices.I obtain the Product ID (PID) by entering a device’s serial number into the Cisco SNCheck T...
I COLLECTED ALL DEVICES PID USING SERIAL NUMBERS USING BELOW API CALLsn2info_url = 'https://apix.cisco.com/sn2info/v2/coverage/summary/serial_numbers/'But For few devices, PID that were taken using sn2info api cannot obtain the suggested version or ...
I am using https://cloudsso.cisco.com/as/token.oauth2 grant_type=password to get a token. For mosts users it works fine - I provide the credentials and get a bearer token. But for others it fails - {"error_description": "We didn't recognize the usern...
HelloI would like to control a Sony projector with a macro from a codec (RoomOS 11.15.1.0) via RS-232 (outbound). The Power-On command is: "\xA9\x17\x2E\x00\x00\x00\x00\x3F\x9A" (all HEX) But the codec sends out the following: \xC2\xA9\x17\x2E\x00\x0...
Dear Cisco API Support Team,I hope this message finds you well.I am writing to request an increase in the rate limit for the Cisco EOX Data API. Currently, the limit is set at 5000 hits per day per credential. Our application heavily relies on real-t...
In My Apps & Keys not found EoX API ? Found Only - CEEM API - Cisco Carlsbad IT QA - Cisco On Demand CHIDS API - Cisco PSIRT openVuln API - Corona API - Datafoundation-POE - Hello API - HelloCommerce API - Workforce Mohit Can you help me to add EoX?
Hi! The method CiscoConnection.getLocalUUID() basically returns correct values. But the UUIDs are not available at an early stage in the lifecycle of the call. I setup a simple call between TermA and TermB. The JTAP version is 12.5.1.16900-48. This i...
Cisco IOS XE Yazılımı, Sürüm 17.03.06 serisi anahtar nxAPI sürümü mü?
Trying to deploy an IOx application using Ansible and get the following error. I have tried using MAC OSX and Ubuntu, but get the same error: "msg": "Status code was -1 and not [200]: Request failed: <urlopen error [SSL: TLSV1_ALERT_INTERNAL_ERROR] t...
Hi,Cisco Bug API https://developer.cisco.com/docs/support-apis/#!bug/get-bug-details-by-bug-ids returns status code 403 with a message "Developer Inactive". I registered the application in Cisco API Console and authenticated the request by providin...
I found a bug in Cisco ER Configuration API on Cisco ER version 14.0.1.12900-37 in the rest call /cerl to retrieves all the conventional ERLs (https://developer.cisco.com/docs/cer-config/#!erl-management/erl-management) Each returned ERL has a trunc...
It seems that the API described here: https://docs.cloudapps.cisco.com/pss/APIDevGuide/pss_api_service_calls.html...has stopped working on a customer-by-customer basis since yesterday.We are getting 401 HTTP responses from the OLD auth URLWe are gett...
Good morning, I hope you are well. I am trying to create a script to export all the devices that we have with the secure endpoint installed in order to verify that all the devices are protected. My intention is to use the Endpoint API but what I need...
Hi developers, please use this forum to discuss any bugs that you find with Cisco's APIs. We look forward to hearing about any issues and getting them fixed!
