Routers - Small Business

                   We have setup a new internal web server so now we have two internal web server and both or hosting sites on port 80.  Currently we have port 80 forwarding to one of the web servers and users are able to hit it from the outside.  Is...

I have been running a email/web/ftp server on one server for 9 years. I have currently acquired a Barracuda spam 300. I cant get the emails to go thru the barracuda first. Here is how it is setup:my email and web come in thru one outside address..cal...

Hi,I'm monitoring the SNMP Interface of a VPN Tunnel in a RV082. The problem is that it seems that the ID of the networkinterface keep changing.It looks like this:ipx0  id 2 LANipx1  id 3 WAN1ipx2  id 4 WAN2ipsec0 id 9 IPSec Tunnel #1But then, a few ...

Hi,Someone knows if there are Cisco SMB routers with ethernet ports which permits make mirroring?Or some SMB router with Netflow capability?Thanks

I have an Asterisk system fully operational at my offices in Cape Town, with a VPN to my house in the UK. I have a VoIP phone here in the UK that interfaces to the Asterisk system and everything works OK.I have now added an SPA3102 here in the UK, co...

Hi,I have a problem which is quite urgent I bought 2 RV180 to setup a VPN tunnel between a remote site and central officeThe VPN tunnel is established, I can ping from central office to remote site but browsing on that server fails.Here is my Network...

I have been using this RV016 router for a few years and it is been fine.  My internet connection is a T1 line.  I have several public IP address, all pointing to various servers, routed through 1 to 1 NAT.I'm considering adding a second WAN source vi...

Could someone help me with the configuration for a site-to-site VPN tunnel between an RV180 and RVS4000?I am pretty sure these two devices should be able to establish a VPN tunnel between each other, but I cannot seem to get it working.  I have confi...

There are still some old and new issues. This should not be so at a previously highly rated router manufacturer as Cisco. 1) Please, observe, that after a firmware upgrade from 1.0.3.5 to 1.0.4.17 it was needed to delete all the access rules and crea...

I'm dessigning a network and this is my scenario:5 - Remote sites (no static IP there)3 - Remote users (comercial)1 - Central building (using static ip address)Is it possible to establish a permanent vpn tunnel between each one of my remote sites to ...

I have a RV082 v2 with Firmware 2.0.2.01-tm with a Site-to-Site VPN to a Cisco ASA5510.The PCs behind the RV082 can not see two webservers behind the ASA5510. Both servers have full DNS registration and are accessable from other sites with RV042 rout...

I have recently installed a RV042 on a home network with good success and was able to connect to the network from another location using QuickVPN on my laptop. The Internet access was via cable.I am now up on the coast of Maine with the laptop and my...

                   Hi,I have an ongoing problem with my WRVS4400N router. It reboots on it's own when streaming video through a wireless connection (computer, xbox, roku, tv). Once I make a wired conection, it performs flawlessly. The firmware is up ...

Is anyone else using the Beta firmware?There are some improvements.One can now view alerts and notifications within the software.Also it appears as if the Protect Link Block Page was reworked to allow direct acces to Trand Micro Website for checking ...