JD
Thanks for replying. Config is below. I have had to change the ip addresses for security reasons. The second subnet given to me by the ISP as we required 2 static addresses is xxx.xxx.xxx.xxx/29. Can I just use 1 of the new addresses for the interfaces or do I need to route to them? I would really like to AVOID using NAT as we will have ipsec VPN terminating on the firewall.
Thanks your help is much appreciated.
!
version 12.3
no service pad
service timestamps debug datetime
service timestamps log datetime
service password-encryption
!
hostname visitorXS
!
boot-start-marker
boot-end-marker
!
!
username xxxxxxx privilege 15 password 0 xxxxxx
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
no aaa new-model
!
!
!
!
no ip cef
!
!
!
!
interface ATM0
mac-address 000f.f72d.ae77
ip address 193.77.193.186 255.255.255.255
no ip route-cache
no atm ilmi-keepalive
bundle-enable
dsl operating-mode ansi-dmt
hold-queue 224 in
pvc 8/35
encapsulation aal5snap
!
!
interface FastEthernet0
ip address 193.77.193.186 255.255.255.255
no ip route-cache
speed auto
bridge-group 1
!
ip classless
no ip http server
!
!
!
!
control-plane
!
bridge 1 protocol ieee
!
line con 0
line aux 0
line vty 0 4
privilege level 15
login local
transport input telnet
!
end
