Routing

Hi, we are going to install a NM-1T3/E3 card to C3725 -> Does 3725 support online insertion and removal for this type of card? I found several advises, but they slightly differ. Could you give me an advice? Thank's in advance.

Hi guys,We wants to setup our network. At head off we hv 40users & we hv factory at two locations. What all equipents we required like router with how many serial port at head off. Which link is suitable for us etc etc. pls guide me.RegdsAK

Hi expert,I am a beginner in ospf, below are few issues, hope you can help to solve. Thanks !!!(1) Is it OSPF will choose DR and BDR in "EACH" LAN segment ?(2) According to the attach diagram, (2.1)From the view of "LAN Segment A", is it RTC will be ...

HiI have a cisco 2950G 48 port switch.the ports of the switch restarts automatically randomly.so have any idea why this is happend??Thanks Biplob

what's a black hole route.

seems one of my associates took a copy of a text file config and ran it on top of a production router. I cant ctrl-break into rommon with any combination as it freezes during bootup if I do that...I get crazy characters all over the screen during a ...

We use a Cisco 1712 router that connects over a switch our servers as well as our LAN with the Internet.Strangely I experience the behavior that from within the LAN I can access our connected server over its WAN-IP by ftp using a WinXP notebooks, but...

i have heard this things many times that the backbone of this company is not that reliable or we shd upgarde the backbone of this WAN design.....i am bit conuse what actually bckbone is......like if we have four sites connected togather via FR or ded...

HiCan anyone know to me difference between unbalanced and balanced Network Module card ? ?..thanksbiplob

HiI need urgent quary.I know NM-1CE1U card end of product in cisco.But can i use this card in 2811 router ?, becuse i have no NM-1CE1T1-PRI card.and can i surf my work by NM-1CE1U this card.thanksBiplob

Router1:!interface Tunnel1 description MULTI-POINT GRE TUNNEL for BRANCHES bandwidth 1000 ip address 172.16.0.1 255.255.255.0 no ip redirects ip mtu 1400 ip nhrp authentication dmvpn ip nhrp map multicast dynamic ip nhrp holdtime 300 tunnel source Fa...

I have WS-SUP720-3B= with Latest IOS 12.2-17d.SXB11 and WS-X6066-SLB-APC [3.1(4)]and i put the SLB module in SLOT 1 in 6509.Is SLB Module can support on SLOT 1

Does anyone else agree with me that it would be really really useful if you could set the AD from a route map? That way you could set it according to a tag, for example. That would make maintaining border routers a lot easier, especially where you ...

Hidear Experts..I want to know that does cisco have any tcp accelerator like packeteer or f5 or juniper?acctully I am using a tcp based coonection over the wan link (VSAT) so i am looking for tcp accelrator but o prefer use cisco rather than other br...