cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5309
Views
5
Helpful
4
Replies

2821, HELP: System returned to ROM by bus error at PC 0x423A3528, address 0xB0D0B27

Robert Ho
Level 1
Level 1

hi all, router crashed a couple times today.

can anyone check to see if it is a software or hardware issue?

based on the address 0xB0D0B27 and output of show region, it could be a software issue?

ROuter#sh ver
Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 12.4(24)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 25-Feb-09 17:54 by prod_rel_team

ROM: System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1)

AAC-Aokea uptime is 50 minutes
System returned to ROM by bus error at PC 0x423A3528, address 0xB0D0B27 at 01:14:48 UTC Wed Oct 6 2010
System image file is "flash:c2800nm-adventerprisek9-mz.124-24.T.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco 2821 (revision 53.51) with 1036288K/12288K bytes of memory.
Processor board ID FTX1039A032
2 Gigabit Ethernet interfaces
4 Serial interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
254464K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102

AAC-Aokea#sh region
Region Manager:

      Start         End     Size(b)  Class  Media  Name
0x0F400000  0x0FFFFFFF    12582912  Iomem  R/W    iomem:(uncached_iomem_region)
0x3F400000  0x3FFFFFFF    12582912  Iomem  R/W    iomem
0x40000000  0x7F3FFFFF  1061158912  Local  R/W    main
0x40014080  0x443DFFFF    71090048  IText  R/O    main:text
0x443E4780  0x4711D05F    47417568  IData  R/W    main:data
0x4711D060  0x4849D01F    20447168  IBss   R/W    main:bss
0x4849D020  0x7F3FFFFF   922103776  Local  R/W    main:heap
0x80000000  0x8FFFFFFF   268435456  Local  R/W    main:(main_k0)
0xA0000000  0xAFFFFFFF   268435456  Local  R/W    main:(main_k1)


Free Region Manager:

      Start         End     Size(b)  Class  Media  Name

Router#

1 Accepted Solution

Accepted Solutions

I don't see 12.4(25b) in affected versions, so it should be OK, but keep in mind that you may be losing features moving from 12.4T to 12.4 mainline

View solution in original post

4 Replies 4

vragotha
Level 3
Level 3

Could be CSCsx19184 (http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsx19184) if you are running SIP

Fixed in 12.4(24)T1 or higher

If not, post a show run, info about any changes made recently

Looks like you are right! We are running SIP through the router and the code is at 12.4(24)T.

Will be upgrading to 12.4(24)T4 - thank you!

my cco access wont be available until monday, to download the latest software.

i grabbed 12.4(25)b off another router (c2800nm-adventerprisek9-mz.124-25b.bin)

can you check the bug toolkit to see if that version has the fix?

thanks!

-robert

I don't see 12.4(25b) in affected versions, so it should be OK, but keep in mind that you may be losing features moving from 12.4T to 12.4 mainline

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: