06-16-2011 01:29 PM - edited 03-04-2019 12:44 PM
Hi,
This is my first time on the forum so apologies if the information below is a little vague.
We have recently purchased some Cisco 3750x switches and we are getting complaints from users that the performance is poor when both the PC's NIC and switch port are fixed at 100/Full?
There are no errors or collisions on the switch interfaces so there is no obvious problem on the switch. The PC's are standard DELL Optiplex 755/760's
or gx 520's.
We were wondering if anyone else had come across any performance issues when configuring the switchport to 100/FULL?
Cheers
Steve
06-16-2011 11:10 PM
Verify personally what is the complain about.
It is indeed too vague.
"Slow" when doing "what" ?
06-17-2011 12:41 AM
Hi Steve,
could you please share the output of
show run int x/x
sh int x/x
along with information mentioned by Paolo.
Cheers,
Sunil
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide