about isdn .. pls help

[pccthailand]

Hi all

1. I'm not sure about the backup interface command , this command can use one interface on single router ? if i would like to use backup two interface it can't ??

2. pls explain me about isdn bandwidth , i'm not sure it's 144 kbps or 192 kbps

thanks for kindly

[imnilesh]

Hi;

you can use like this :

interface Serial0/0/1

description XXXXX

bandwidth 64

ip address XXXXXX XXXXXXXXX

ip accounting output-packets

backup delay 2 2

backup interface BRI0/1/0

hope this will help...

//nil

[thisisshanky]

backup interface command can be used on multiple interfaces

isdn bri bandwidth is 128 kbps (each B channel = 64kbps) and 16 kbps of signalling channel (D channel). That adds to 144 kbps. This is the actual data rate.

With framing bits added there is another 48 kbps required for transmitting framing bits. This total adds up to 192 kbps.This rate should be called as the actual bit rate.

I do not think, that you can use the isdn interface as backup to multiple serial interfaces. As I once do remember, that it showed an error message saying,

"ISDN BRI interface is already a backup interface to serial 0"

HTH

[pccthailand]

hello

if i config ppp authentication chap on dialer profile , i have to use dialer remote-name every time ?

thanks for your kindly