I tested the ASA 5520 iperf3 to check its performance. I then wanted to add NAT to it to find out how much it was taxing the device. However, I kept having the problem that almost all traffic was untranslated.
![krzysztofmaciejewskiit_0-1725982052479.png krzysztofmaciejewskiit_0-1725982052479.png](/t5/image/serverpage/image-id/228872i36E458F7CFDCE378/image-size/medium?v=v2&px=400)
The created objects are the same, i.e. 192.168.0.0/24, because the server address is 192.168.60.13 and the client address is 192.168.1.2.
How should I configure NAT on the ASA to test the impact of NAT?