cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
316
Views
5
Helpful
7
Replies
JLOU1234
Beginner

BGP RPKI configuration not working

Currently doing a bgp rpki topology and set up an ubuntu server with an rpki validator and everything is working. 

Now, trying to connect my bgp routers to the rpki validator. 

I enter router bgp <as number> 

Then 

 

Device(config-router)# bgp rpki server tcp 192.168.2.2 port 1029 refresh 60


This should be correct but I am getting an error pointing to the "p" in rpki. I went through the command letter by letter and inserting a question mark to see the available options. Is it possible this router cannot use rpki, or do I have to do something to unlock this?

1 ACCEPTED SOLUTION

Accepted Solutions

Try CSR1000V  16.X here is my lab screenshot.

 

image.png



BB


*** Rate All Helpful Responses ***

View solution in original post

7 REPLIES 7
Georg Pauwen
VIP Expert

Hello,

 

which router and IOS is this on ? I don't have the command available either, in version 15.6.2 IOSv...

JLOU1234
Beginner

I am using GNS3, so using IOU i86bi-linux-l3-adventerprisek9-15.3.1.3T.bin. 

 

Its cisco configuration, but I think this might be the issue. 

Hello,

 

indeed. It is not an available command in GNS3, apparently.

JLOU1234
Beginner

Do you know of any networking simulators that might be able to do it, while allowing for an ubuntu server with the RPKI validator to be downloaded?

Was thinking maybe EVE-NG

 

Cheers

Hello,

 

I think EVE NG uses the same Dynamips/VIRL images as GNS3, so that probably won't work either...

Great lol, hopefully find something. So weird why it is like that. Anything you recommend trying as I really need it to work? 

 

What about Juniper routers on GNS3/EVE?

 

Thanks

 

Try CSR1000V  16.X here is my lab screenshot.

 

image.png



BB


*** Rate All Helpful Responses ***

View solution in original post