Cisco 2-pair (HWIC-2SHDSL)

[net buzz]

Hi!

This module provides two ports of 2-wire or one port of 4-wire connectivity options.

But physically, there is only one 1 G.SHDSL interface where the RJ-11 connector plugs.

Can this module be used as 2 WAN G.SHDSL ports if for e.g, there are two 2-wire (1 pair) separate SHDSL lines need that need to be connected.

Thanks,

Alvin 

[paolo bevilacqua · Accepted solution]

Yes.

http://www.cisco.com/en/US/docs/routers/access/interfaces/software/feature/guide/shdslfm.html