Routing

hi,I have a cisco router 881 with advipservices running ios Version 15.2(4)M1this router is a device that the user will connect company equipement with antivirus and such.is there a way I can force the ports like fe0 fe1 2 3 to accept only devices wi...

  Hi,I am experiencing a problem that when I telnet a router ip.It prompts for username and password.After entering username and password the router enter into exec mode with  > prompt.But when trying to enter in privelege exec mode by typing en or e...

R6 - R7 via Serial link.  R6 is installing updates from R7 in its R.T.  R7 is receiving updates from R6 but not installing the routes in the RIP database or R.T.  Any ideas what might be wrong?  R6: version 1 timers basic 30 180 0 240 passive-interfa...

Hello,Currently. we have this license:TTechnology Package License Information for Module:'c1900' -----------------------------------------------------------------Technology    Technology-package           Technology-package              Current      ...

Dear Team,We have two routers A & B. We need to terminate 10Mbps link between these two routers. We have got ether output on both the ends.So at A we have Fast ethernet port for which we can terminate the link. At B end We does not have Free ethernet...

I am trying to figure out how to setup either dedicated or a higher level priority bandwidth for our Video conference system over one of WAN links. We have a 5 MB WAN that we would like to either 1. Dedicate 1.5 MB of the bandwidth to it. or 2. Make ...

Hi there,Currently, we're using BGP vrf feature on Switch 3750x and we have created many vrfs for different connections. Our current settings look like,***************************************************router bgp 65000 bgp log-neighbor-changes timer...

We have a 5510 and I have a second ISP setup for a backup link. We have 4 ports connected to 4 different internal subnets. I want to force one of the ports to use the backup ISP link at all times. I'm having a little problem with where I need to make...

Task: to organize the encoded transmission channel of L2 over IP for the speed 2Gbit/s via two parallel channels on 1Gbit/s each (with BGP support). Without use equipment of level of ISP, only Branch Routers with or without ASA.

Hi guys, I have a Router 7200  with this version "IOS (tm) 7200 Software (C7200-JK9S-M), Version 12.2(21a), RELEASE SOFTWARE (fc2)". I need to configure the serial 4/0 like "no crc4" or "crc4". When i configure crc4  it takes the changes but does not...

HI Friends,i need recommendation to buy Cisco Linksys Adsl Router. I want two requirements in it 1- should support 100MB ADSL connection.2- it should be capable to perform routing.Please Advice Thanks & Regards,Faysal

Hello,please help on following problem.Does anyone know if igmp snooping works for dot1q tunnel multicast packets (q-in-q)?It seems it doesn't work on my Cisco 7600 or I'm doing something wrong.Does it depend on platfrom (6500, 3750..etc), IOS versio...