cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
258
Views
0
Helpful
3
Replies

Cisco ISR 4461 Upgrade

nematosama
Level 1
Level 1

Hello,,,

We have Cisco ISR 4461 with isr4400v2-universalk9.17.06.03a.SPA.bin ISO image, we need to implement the SSL VPN feature so we find that we need to upgrade to Cupertino-17.7.1a ISO.

https://software.cisco.com/download/home/286320564/type/282046477/release/Cupertino-17.7.1a

when we are doing the upgrade we get the booter to fail, what do we do exactly?

kind regardsresetting.jpeg

3 Replies 3

marce1000
VIP
VIP

 

 - Check Release Notes for targeted version (to be installed) ; look for ROMMON and or verify if rommon needs to be upgraded first (e,g.)

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

balaji.bandi
Hall of Fame
Hall of Fame

If you upgrading from 17.6. to 17.7 that is ok mostly ROMMON Upgraded when you upgraded to 17.6 version.

Error was not able to find the image ?

the image download page show - isr4400v2-universalk9.17.07.01a.SPA.bin  (did you downloaded the right image ?)

Suggest to upgrade to 17.9.4a is stable version and cisco suggest for the same

Get in to ROMMON and check the file in the flash and check and boot command right image name.

also suggest to install mode rather than bundle is suggested method.

 

 

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

ajagadee
Cisco Employee
Cisco Employee

Hi, It looks like you might have downloaded the wrong image. The image name should have a v2 for the 4461.

https://software.cisco.com/download/home/286320564/type/282046477/release/Cupertino-17.7.1a

isr4400v2-universalk9.17.07.01a.SPA.bin

HTH.

Regards,

Arul

Review Cisco Networking for a $25 gift card