cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2534
Views
5
Helpful
2
Replies

Cisco ISR4431 boost licence removal

James Simpson
Beginner
Beginner

Hi 

 

 

Is it possible to uninstall the Boost licence on a Cisco ISR4431 please ?

 

 

Many thanks 

 Routing, Branch Route

 

James Simpson 

1 Accepted Solution

Accepted Solutions

Moaz.Elzhrawey
Beginner
Beginner

Hi,

 

Use the no platform hardware throughput level boost command to disable the functionality.

 

Note#

The command is removed from the configuration, but the license is released only after the device is reloaded.

The throughput level does not take effect until the device is reloaded.

The license visibility is available till the device is reloaded..

 

*** Please rate this as helpful and correct answer if it solved your problem. ***

Moaz Elzhrawey
Solutions Architect, CCIE 2x RS | DC, VCP 3x NV | DCV | DTM
+966 596822551

View solution in original post

2 Replies 2

Moaz.Elzhrawey
Beginner
Beginner

Hi,

 

Use the no platform hardware throughput level boost command to disable the functionality.

 

Note#

The command is removed from the configuration, but the license is released only after the device is reloaded.

The throughput level does not take effect until the device is reloaded.

The license visibility is available till the device is reloaded..

 

*** Please rate this as helpful and correct answer if it solved your problem. ***

Moaz Elzhrawey
Solutions Architect, CCIE 2x RS | DC, VCP 3x NV | DCV | DTM
+966 596822551

Thank you

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers