cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
532
Views
5
Helpful
2
Replies
Highlighted
Beginner

Cisco ISR4431 boost licence removal

Hi 

 

 

Is it possible to uninstall the Boost licence on a Cisco ISR4431 please ?

 

 

Many thanks 

 Routing, Branch Route

 

James Simpson 

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Beginner

Re: Cisco ISR4431 boost licence removal

Hi,

 

Use the no platform hardware throughput level boost command to disable the functionality.

 

Note#

The command is removed from the configuration, but the license is released only after the device is reloaded.

The throughput level does not take effect until the device is reloaded.

The license visibility is available till the device is reloaded..

 

*** Please rate this as helpful and correct answer if it solved your problem. ***

Moaz Elzhrawey
Solutions Architect, CCIE 2x RS | DC, VCP 3x NV | DCV | DTM
+966 596822551

View solution in original post

2 REPLIES 2
Highlighted
Beginner

Re: Cisco ISR4431 boost licence removal

Hi,

 

Use the no platform hardware throughput level boost command to disable the functionality.

 

Note#

The command is removed from the configuration, but the license is released only after the device is reloaded.

The throughput level does not take effect until the device is reloaded.

The license visibility is available till the device is reloaded..

 

*** Please rate this as helpful and correct answer if it solved your problem. ***

Moaz Elzhrawey
Solutions Architect, CCIE 2x RS | DC, VCP 3x NV | DCV | DTM
+966 596822551

View solution in original post

Highlighted
Beginner

Re: Cisco ISR4431 boost licence removal

Thank you