01-07-2019 06:31 AM - edited 03-05-2019 11:09 AM
Hi
Is it possible to uninstall the Boost licence on a Cisco ISR4431 please ?
Many thanks
Routing, Branch Route
James Simpson
Solved! Go to Solution.
01-07-2019 07:17 AM
Hi,
Use the no platform hardware throughput level boost command to disable the functionality.
Note#
The command is removed from the configuration, but the license is released only after the device is reloaded.
The throughput level does not take effect until the device is reloaded.
The license visibility is available till the device is reloaded..
*** Please rate this as helpful and correct answer if it solved your problem. ***
01-07-2019 07:17 AM
Hi,
Use the no platform hardware throughput level boost command to disable the functionality.
Note#
The command is removed from the configuration, but the license is released only after the device is reloaded.
The throughput level does not take effect until the device is reloaded.
The license visibility is available till the device is reloaded..
*** Please rate this as helpful and correct answer if it solved your problem. ***
01-07-2019 08:10 AM
Thank you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide