02-06-2020 11:11 PM - edited 02-07-2020 12:49 AM
after boot:
cisco ISR4431/K9 (1RU) processor with 7940760K/6147K bytes of memory.
1 Virtual Ethernet interface
8 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
16777216K bytes of physical memory.
7081983K bytes of flash memory at bootflash:.
but after sh ver:
cisco ISR4431/K9 (1RU) processor with 7940760K/6147K bytes of memory.
1 Virtual Ethernet interface
32768K bytes of non-volatile configuration memory.
16777216K bytes of physical memory.
7081983K bytes of flash memory at bootflash:.
sh dig all eeprom:
MIDPLANE EEPROM data:
SPA EEPROM data for subslot 0/0:
Product Identifier (PID) : ISR4431-X-4x1GE
Version Identifier (VID) : V01
PCB Serial Number :
Top Assy. Part Number : 68-2236-01
Top Assy. Revision : A0
Hardware Revision : 2.2
CLEI Code :
SPA EEPROM data for subslot 0/1:
Product Identifier (PID) : NIM-ES2-4
Version Identifier (VID) : V01
PCB Serial Number :
Hardware Revision : 1.0
CLEI Code :
isr4400-universalk9.16.06.02.SPA.bin
Solved! Go to Solution.
02-07-2020 02:42 AM
I'm fix it
Power down
take out and insert module NIM-ES2-4
Power on
and vu-alya
Router#show interfaces status
Port Name Status Vlan Duplex Speed Type
Gi0/1/0 connected trunk a-full a-1000 10/100/1000BaseTX
Gi0/1/1 notconnect 1 auto auto 10/100/1000BaseTX
Gi0/1/2 notconnect 1 auto auto 10/100/1000BaseTX
Gi0/1/3 notconnect 1 auto auto 10/100/1000BaseTX
thanks to all for help
02-06-2020 11:40 PM
02-07-2020 12:10 AM
Hello,
do the interfaces actually show up in the running configuration, and can you configure the interfaces ?
02-07-2020 12:31 AM
02-07-2020 12:12 AM
- Post the output of show interface status
M.
02-07-2020 12:26 AM
02-07-2020 01:10 AM
- Odd indeed, one option you have to do a factory reset and check if the problem persists :
https://dcloud-cms.cisco.com/help/reset-router
M.
02-07-2020 12:03 AM
Hello,
odd...could be a licensing issue. Can you post the output of:
sh lic
?
02-07-2020 12:27 AM
02-07-2020 01:22 AM
02-07-2020 02:42 AM
I'm fix it
Power down
take out and insert module NIM-ES2-4
Power on
and vu-alya
Router#show interfaces status
Port Name Status Vlan Duplex Speed Type
Gi0/1/0 connected trunk a-full a-1000 10/100/1000BaseTX
Gi0/1/1 notconnect 1 auto auto 10/100/1000BaseTX
Gi0/1/2 notconnect 1 auto auto 10/100/1000BaseTX
Gi0/1/3 notconnect 1 auto auto 10/100/1000BaseTX
thanks to all for help
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide