02-03-2019 10:30 PM - edited 03-05-2019 11:14 AM
Hi all,
Hopefully you can help me out. I'm trying to configure a DMVPN phase 1 Hub to Spoke connection (only mGRE and NHRP). On the hub my tunnel 0 interface is up/down and i'm unsure why. I've triple checked the tunnel config. (NBMA and tunnel IP's etc.) and it all looks good. I'm using a default route on the hub and spokes and have full connectivity site to site using the underlay network. I've added the relevant config. below :-
HUB
interface Tunnel0
ip address 10.1.1.1 255.255.255.0
no ip redirects
ip nhrp network-id 10
tunnel source 15.0.0.1
tunnel mode gre multipoint
!
interface Serial0/0
ip address 15.0.0.1 255.255.255.0
clock rate 2000000
!
ip classless
ip route 0.0.0.0 0.0.0.0 Serial0/0
SPOKE
interface Tunnel0
ip address 10.1.1.2 255.255.255.0
ip nhrp map 10.1.1.1 15.0.0.1
ip nhrp network-id 10
ip nhrp nhs 10.1.1.1
tunnel source 25.0.0.2
tunnel destination 15.0.0.1
!
interface Serial0/1
ip address 25.0.0.2 255.255.255.0
clock rate 2000000
!
ip classless
ip route 0.0.0.0 0.0.0.0 Serial0/1
I'm not using any routing protocols, only default routes on the hub and spokes but (as mentioned above) have full connectivity yet still can't get the hub tunnel 0 to move from up/down. The spoke is looking good in terms of the tunnel 0 being up/up and output from sh ip nhrp.
Any help is much appreciated,
Sunny
02-07-2019 09:26 PM
Gents,
Suggested changes made to no avail. Issue still persists. Full configs as requested :-
HUB
hostname R1
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
ip subnet-zero
no ip icmp rate-limit unreachable
ip cef
!
!
ip tcp synwait-time 5
!
ip audit po max-events 100
no ip domain lookup
!
!
!
!
!
!
!
interface Loopback0
ip address 1.1.1.1 255.255.255.255
!
interface Tunnel0
ip address 10.1.1.1 255.255.255.0
no ip redirects
ip nhrp map multicast dynamic
ip nhrp network-id 10
ip nhrp nhs 10.1.1.1
tunnel source Serial0/0
tunnel mode gre multipoint
!
interface FastEthernet0/0
ip address 192.168.1.1 255.255.255.0
duplex auto
speed auto
!
interface Serial0/0
ip address 15.0.0.1 255.255.255.0
clock rate 2000000
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/1
no ip address
shutdown
clock rate 2000000
!
interface Serial0/2
no ip address
shutdown
clock rate 2000000
!
interface Serial0/3
no ip address
shutdown
clock rate 2000000
!
interface FastEthernet1/0
no ip address
shutdown
duplex auto
speed auto
!
interface Serial2/0
no ip address
shutdown
serial restart-delay 0
!
interface Serial2/1
no ip address
shutdown
serial restart-delay 0
!
interface Serial2/2
no ip address
shutdown
serial restart-delay 0
!
interface Serial2/3
no ip address
shutdown
serial restart-delay 0
!
interface FastEthernet3/0
no ip address
shutdown
!
interface FastEthernet3/1
no ip address
shutdown
!
interface FastEthernet3/2
no ip address
shutdown
!
interface FastEthernet3/3
no ip address
shutdown
!
interface FastEthernet3/4
no ip address
shutdown
!
interface FastEthernet3/5
no ip address
shutdown
!
interface FastEthernet3/6
no ip address
shutdown
!
interface FastEthernet3/7
no ip address
shutdown
!
interface FastEthernet3/8
no ip address
shutdown
!
interface FastEthernet3/9
no ip address
shutdown
!
interface FastEthernet3/10
no ip address
shutdown
!
interface FastEthernet3/11
no ip address
shutdown
!
interface FastEthernet3/12
no ip address
shutdown
!
interface FastEthernet3/13
no ip address
shutdown
!
interface FastEthernet3/14
no ip address
shutdown
!
interface FastEthernet3/15
no ip address
shutdown
!
interface FastEthernet4/0
no ip address
shutdown
duplex auto
speed auto
!
interface Vlan1
no ip address
shutdown
!
ip classless
ip route 0.0.0.0 0.0.0.0 Serial0/0
no ip http server
no ip http secure-server
!
no cdp log mismatch duplex
!
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
line vty 0 4
login
!
end
SPOKE
hostname R2
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
ip subnet-zero
no ip icmp rate-limit unreachable
ip cef
!
!
ip tcp synwait-time 5
!
ip audit po max-events 100
no ip domain lookup
!
!
!
!
!
!
!
interface Loopback0
ip address 2.2.2.2 255.255.255.255
!
interface Tunnel0
ip address 10.1.1.2 255.255.255.0
ip nhrp map 10.1.1.1 15.0.0.1
ip nhrp map multicast 15.0.0.1
ip nhrp network-id 10
ip nhrp nhs 10.1.1.1
tunnel source Serial0/1
tunnel destination 15.0.0.1
!
interface Tunnel1
no ip address
!
interface FastEthernet0/0
ip address 192.168.2.1 255.255.255.0
duplex auto
speed auto
!
interface Serial0/0
no ip address
clock rate 2000000
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/1
ip address 25.0.0.2 255.255.255.0
clock rate 2000000
!
interface Serial0/2
no ip address
shutdown
clock rate 2000000
!
interface Serial0/3
no ip address
shutdown
clock rate 2000000
!
interface FastEthernet1/0
no ip address
shutdown
duplex auto
speed auto
!
interface Serial2/0
no ip address
shutdown
serial restart-delay 0
!
interface Serial2/1
no ip address
shutdown
serial restart-delay 0
!
interface Serial2/2
no ip address
shutdown
serial restart-delay 0
!
interface Serial2/3
no ip address
shutdown
serial restart-delay 0
!
interface FastEthernet3/0
no ip address
shutdown
!
interface FastEthernet3/1
no ip address
shutdown
!
interface FastEthernet3/2
no ip address
shutdown
!
interface FastEthernet3/3
no ip address
shutdown
!
interface FastEthernet3/4
no ip address
shutdown
!
interface FastEthernet3/5
no ip address
shutdown
!
interface FastEthernet3/6
no ip address
shutdown
!
interface FastEthernet3/7
no ip address
shutdown
!
interface FastEthernet3/8
no ip address
shutdown
!
interface FastEthernet3/9
no ip address
shutdown
!
interface FastEthernet3/10
no ip address
shutdown
!
interface FastEthernet3/11
no ip address
shutdown
!
interface FastEthernet3/12
no ip address
shutdown
!
interface FastEthernet3/13
no ip address
shutdown
!
interface FastEthernet3/14
no ip address
shutdown
!
interface FastEthernet3/15
no ip address
shutdown
!
interface FastEthernet4/0
no ip address
shutdown
duplex auto
speed auto
!
interface Vlan1
no ip address
shutdown
!
ip classless
ip route 0.0.0.0 0.0.0.0 Serial0/1
no ip http server
no ip http secure-server
!
no cdp log mismatch duplex
!
!
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
exec-timeout 0 0
privilege level 15
logging synchronous
line vty 0 4
login
!
end
02-08-2019 02:20 AM
02-09-2019 12:46 PM
02-09-2019 06:56 PM
The tunnel interface is tied to the physical interface including reachability to the destination tunnel. Conditions that can cause the Tunnel to be up/down include:
1. Physical interface is shutdown
2. No ip route to the destination
I guess this is a lab that you're doing. I would suggest the following
1. Shut/No shut the tunnel interface
2. Change the clock rate on the serial interface
3. Use the Fastethernet interface. If it works, then it's an issue with the Serial interface.
4. Delete R1 (Hub) and configure a fresh router
02-10-2019 02:13 PM
02-10-2019 02:31 AM
show the network topology
just try to create ordinary p2p gre tunnel and check if it works...
02-10-2019 02:17 PM
02-10-2019 04:40 PM
if so, it should work.
Try to configure from scratch
https://networklessons.com/cisco/ccie-routing-switching/dmvpn-phase-1-basic-configuration
02-21-2019 12:09 PM
02-21-2019 12:15 PM
oh we were in impression this was live environment, glad you clarified. and working.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide