10-08-2009 07:29 PM - edited 03-04-2019 06:18 AM
I have a C3600 that has no config on it. When I power it up I get
C3600 processor with 65536 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled
loadprog: bad file magic number: 0x0
boot: cannot load "flash:"
System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
oC3600 processor with 65536 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled
rommon 1 >
rommon 1 >
Can someone point me to a Document to figure this out?
10-08-2009 09:16 PM
Xmodem Console Download Procedure Using ROMmon
http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a008015bfac.shtml
10-09-2009 12:57 AM
There are maybe serverl reasons cause your problem
1\ensure your flash disk (store ios) work well
2\ensure if boot command work well ,exmple :
rommon 1> dev ----list your what kind of media disks are in your router
rommon 2> dir flash: ------get your ios file name
rommon 3>boot c3660-xxx-xxx.bin
3\ if all above cannt boot your router,maybe flash disk has a hardware failure , change it
or , no ios file is in your flash disk,
if no ios file is in your flash disk ,
copy ios using tftp
copy ios using xmodem
copy ios using cf card adapter (u need to open the chassis ,find where flash disk locate)
send me e-mail for more help
leo.vpn@gmail.com ,CCIE Security & SP
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide