Routing

We are upgrading our point-to-point private line from single T1 to two T1 lines. I have installed the DSU/CSU module to the router. Working on the new configuration but found the ppp code I put in doesn't work. I can't figure out what was wrong. If y...

HI,we are running a BGP on the cisco 7206 VXR router we have two BGP router BGP1 and BGP 2 with the LAN - 10.195.0.0/16 and running HSRP on the LAN side for hardware redunanacyon WAN side we have 2 BGP session ( Session A and B ) with the same ISP Cu...

I am getting a few of these in my logs, do I need to take any action? Connection is PPPoE DSL.009357: Jul 8 09:28:22.214 CDT: %FW-4-TCP_OoO_SEG: Dropping TCP Segment: seq:104330552 1492 bytes is out-of-order; expected seq:104304632. Reason: TCP reas...

Greetings:We have a private WAN IP network (WAN: 10.255.255.0/28) consisting with five different subnets each with their own IP (LAN)addressing space.LAN 1= 172.16.0.0/16LAN 2= 10.1.7.0/22LAN 3= 172.28.130.0/23 (VLAN)LAN 4= 172.17.0.0/16LAN 5= 10.169...

HelloWhat's the reason if user successfully connects to corporate network using Cisco VPN Client and he is not able to ping the domain controller and the exchange server either, although all ports are correctly setting up on the ASA?Thanks

Hi,All of a sudden I can't upload files via ftp over IPSec Tunnel between HQ & Branches, any bigger than 8192 bytes. When I try to upload them, it jams when it's uploaded 8192 bytes of the file. Also, if a file is smaller than 8192 byte the upload fi...

Hi All,I had a question regarding 6509 chassis where we had installed two supervisor in slot 5 & 6.SUP720-#B is installed in both slots with MSFC3 & PFC3 installed on both SUP.Both SUPs have same IOS version. But PFC & MSFC have different HW versions...

Hi,I have 2500 series router. I have problem in booting up this router. Below is the console capture. Please do the needful.System Bootstrap, Version 11.0(10c), SOFTWARECopyright (c) 1986-1996 by cisco SystemsBad memory - wrote zero, read 0x80012002 ...

I have two upstream providers, 100 meg and 50 meg, and need a router that will handle them. Right now I'm not doing BGP. Will the 2841 with maxed memory work for this application. I'm an ISP and pass two blocks of class C addresses to my customers...

I recently obtained a Cisco 2621 Router from a friend. My colleague was playing with it and accidentally deleted the IOS image on the router and now I am stuck with the rommon prompt. Could any of you guys help me get an IOS image? Thanks a lot.

1811 / 12.4(6)T11I just got 1811, and I am in trouble to set up a simple web server with this router.Most likely, I do not understand the basic concept, but if anybody can give me a hint, that would be appreciated.I have 12 global IP addresses, one i...

I have a test bed setup with a 7200 and 1841 directly plugged into each other with a rollover t1 card. I'm attempting to make this link a fractioanl T to similuate our remote offices, but every time I try to reduce the timeslots it drops layer2 proto...