04-08-2010 03:07 AM - edited 03-04-2019 08:04 AM
Hi,
I would like to monitor "Slip errors" in a e1 interface from my monitoring Central system so I can setup an alarm when slip errors are encountered. It supports Syslog and SNMP.
I have been loooking for the SNMP OID objects but I couldn't find the correct one for slip errors. I don't know if it is possible to be performed by RMON.
Does somone implemented it before?
04-08-2010 06:37 AM
Have you configure network-clock-select ?
After you do that, there will be no more slip errors.
04-08-2010 07:49 AM
Hi,
The network clock select is already setup and we don't have any problem with slip secs at the moment. But time to time the provider change the timing settings on the line without notifying me. Then I only notice the errors when I login to the router.
This is why I want to configure the monitoring system to trigger alarms when slip errors occur. My idea is to monitor also errored secs, crc , etc. I just stated Slip secs as an example.
04-08-2010 08:31 AM
Use the T1 / E1 MIB for that.
06-17-2016 06:43 AM
I am using MIB RFC1406, in particular the OID 1.3.6.1.2.1.10.18.7.1.6 which is the number of Controlled Slip Seconds.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide