06-16-2008 09:05 AM - edited 03-03-2019 10:22 PM
Folks, I need to get serial number from remote 6509.
I tried 'show diag' but no output returned.
This is IOS version 12.2(18).
Solved! Go to Solution.
06-16-2008 09:12 AM
06-16-2008 09:13 AM
Does sh ver work? The processor board id is the s/n.
06-16-2008 10:24 AM
Sh ver command should work with 6509 to view the serial no.
U can find it appended with Process Board ID.
Pls rate/mark if this helps!!!
06-16-2008 09:12 AM
Try show inventory
Hope that helps
06-16-2008 09:13 AM
Does sh ver work? The processor board id is the s/n.
06-16-2008 10:24 AM
Sh ver command should work with 6509 to view the serial no.
U can find it appended with Process Board ID.
Pls rate/mark if this helps!!!
06-16-2008 10:41 AM
True. I did not realize that "processor board" is the same than "SN"!
Thanks all!!!
01-31-2023 12:32 PM
"processor board" is NOT the same as "SN"
06-17-2008 05:46 AM
'Show module' would be the appropriate command on a 6509. It would even provide the card serial number along with the chassis serial number.
HTH
Ratish
06-17-2008 11:55 AM
I use "show idprom backplane" if you are looking for the chassis SN. If not the there are other options after "show idprom ________"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide