01-25-2009 08:49 AM - edited 03-04-2019 12:58 AM
Hi! All,
I've configured HWIC-DSLSAR with alcatel module on cisco 2821 router. After configuration the card which has the interface ATM 0/0/0 shows initializing and protocol down. The IP towards ISP's side is DHCP and therefore it is configured as negotiated. Can Some One Help me in getting this card work on 2821.
The help would be highly appreciated.
thanks
Attached is output of various commands needed to check the configuration part.
Please Help.
Solved! Go to Solution.
02-03-2009 09:34 PM
Sir,
Replaced the HWIC-ADSLI with HWIC-ADSL but it is not connecting to isp. what can be the problem.
I am onsite, please advice
Thanks
02-04-2009 03:16 AM
Send output of show dsl interface.
02-05-2009 05:00 AM
Dear sir,
Thanks a lot for your advices.
Now the ADSL module is up and the connection is working fine.
Thanks a lot for your kind cooperation.
Warm Regards
KPS Padam
02-05-2009 10:06 AM
You're welcome, please remember to rate posts using the scrollbox below,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide