06-12-2012 04:27 AM - edited 03-04-2019 04:39 PM
HI,
I have Cisco 2801 router with IP Base image, i have upgraded its image into advance Ip services for using IP SLA features but after upgradation HWIC card not showing in configuration.
When i recall IP base image then configuration show presence of HWIC card but with advance IP services HWIC card not showing.
Kindly advice.
BR,
Arshad Ahmed
Solved! Go to Solution.
06-12-2012 09:59 PM
What is the HWIC card (exact part number)?
What is the exact IOS (post the "sh version" if you're not sure)?
06-12-2012 11:01 PM
Right-o. You need a minimum of 12.4(20)T (IP Base feature set) to get to work.
1- and 2-Port Fast Ethernet High-Speed WIC for Cisco Integrated Services Routers
06-12-2012 06:48 PM
You need to research the hardware supported for the specific version of ios and the specific hardware you are using.
Sent from Cisco Technical Support iPad App
06-12-2012 09:47 PM
Hi Arshad,
Hope you have not downgraded the IOS version in the process of upgrading the featureset. Post here the current and previous image names.
Regards,
Talha
06-12-2012 09:59 PM
What is the HWIC card (exact part number)?
What is the exact IOS (post the "sh version" if you're not sure)?
06-12-2012 10:50 PM
Dear All,
Kindly note down the IOS, ROUTER and HWIC details.
Router PID: CISCO2801 VO5
Previous IOS : c2801-ipbase-mz.124-15.T10
Current IOS : c2801-advipservicesk9-mz.124-25a.bin
HWIC : HWIC-1FE
Regards,
Arshad Ahmed
06-12-2012 11:01 PM
Right-o. You need a minimum of 12.4(20)T (IP Base feature set) to get to work.
1- and 2-Port Fast Ethernet High-Speed WIC for Cisco Integrated Services Routers
06-13-2012 12:36 AM
Hi Leo,
Thanks for reply.
As is need IP SLA feature so i have to implement c2801-advipservicesk9-mz.124-20.T.bin
but it require DRAM/FLASH 192/64 but memroy present in my Cisco 2801 is 128/64.
Regards,
Arshad Ahmed
06-13-2012 10:49 AM
Arshad Ahmed
Clearly you have conflicting requirements. The features that you want require a version of code that requires physical resources greater than what your router has. There are only a couple of alternatives and you may not like any of the alternatives:
- you can upgrade RAM and flash.
- you can choose which of the features you can get along without (have the IP SLA without the WIC or have the WIC without the IP SLA).
HTH
Rick
06-13-2012 10:02 PM
Dear all,
Thanks for your helpfull reply.
I have order for DRAM and FLASH in this regards.
Regards,
Arshad Ahmed
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide