05-26-2011 01:28 AM - edited 03-04-2019 12:31 PM
I have a problem with a layer 3 swiches ports that would have an ip address 100.100.100.1 255.255.255.0 and get the wan port would have a Publik via dhcp so then the remote swichtes lied to on a port above the 1023
how can you do this running-config
05-26-2011 02:18 AM
Hi you have configured wrong IP address under interface VLAN 1, instead of (100.100.100.1 /24)
===============================
interface Vlan1
ip address 100.100.10.1 255.255.255.0
===============================
05-26-2011 02:44 AM
I changed that but I always get the ip address Publik be displayed instead of the dhcp ip address how can you solve this
05-26-2011 02:58 AM
will in this case we may help you if you post your running config one more time.
05-26-2011 03:14 AM
Hi,
maybe get a little bit clearer about the issue by posting show commands output and what he thinks should appear instead.
But I don't see any ip add dhcp command and what is this Publik and maybe post a diagram with the other gears involved.
Regards.
Alain.
05-26-2011 03:21 AM
05-26-2011 03:44 AM
you're acting as a dhcp server so what is the problem? your machines don't get IPs?
Regards.
Alain.
05-26-2011 04:40 AM
The clients get an ip address 100.100.100.1 255.255.255.0 and it works but if I no wan port cabin please get this interface overrides the DHCP server how can you solve that
05-26-2011 04:51 AM
but if I no wan port cabin please get this interface overrides the DHCP server how can you solve that
I don't understand.
Alain.
05-26-2011 05:03 AM
if I update the internal dhcp server ip address if I wan port then do no shut the dhcp server does not
05-29-2011 06:39 PM
hmm...dont take this the wrong way but are you using some kind of language translator to post in english?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide