ip address layer 3 and WAN dhcp

[pcfreak49]

I have a problem with a layer 3 swiches ports that would have an ip address 100.100.100.1 255.255.255.0 and get the wan port would have a Publik via dhcp so then the remote swichtes lied to on a port above the 1023
how can you do this running-config

[CSCO11593588]

Hi you have configured wrong IP address under interface VLAN 1, instead of (100.100.100.1 /24)

===============================

interface Vlan1

ip address 100.100.10.1 255.255.255.0

===============================

[pcfreak49]

I changed that but I always get the ip address Publik be displayed instead of the dhcp ip address how can you solve this

[CSCO11593588]

will in this case we may help you if you post your running config one more time.

[cadet alain]

Hi,

maybe get a little bit clearer about the issue by posting show commands output and  what he thinks should appear instead.

But I don't see any  ip add dhcp command and what is this Publik and maybe post a diagram with the other gears involved.

Regards.

Alain.

[pcfreak49]

This current-running

[cadet alain]

you're acting as a dhcp server so what is the problem? your machines don't get IPs?

Regards.

Alain.

[pcfreak49]

The clients get an ip address 100.100.100.1 255.255.255.0 and it works but if I no wan port cabin please get this interface overrides the DHCP server how can you solve that

[cadet alain]

but if I no wan port cabin please get this interface overrides the DHCP server how can you solve that

I don't understand.

Alain.

[pcfreak49]

if I update the internal dhcp server ip address if I wan port then do no shut the dhcp server does not

[gerald.suiza]

hmm...dont take this the wrong way but are you using some kind of language translator to post in english?