cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1305
Views
0
Helpful
3
Replies

ip sla feature

wajid dabir
Level 1
Level 1

c1900-universalk9-mz.SPA.152-4.M2.bin....my this image is supporting a ip sla feature.

But c1900-universalk9-mz.SPA.152-4.M1.bin image is not supporting the ip sla feature.

is i need to upgrade the image or i need any license to install in router?

1 Accepted Solution

Accepted Solutions

Wajid,

As expected, you don't have Data k9 license installed.

-------------------------------------------------

Device#   PID                   SN

-------------------------------------------------

*0        CISCO1921/K9          FGL164723XU

Technology Package License Information for Module:'c1900'

-----------------------------------------------------------------

Technology    Technology-package           Technology-package

              Current       Type           Next reboot

------------------------------------------------------------------

ipbase        ipbasek9      Permanent      ipbasek9

data          None          None           None

data          None          None           None

You can compare this output with the release in which you are able to get IP SLA configuration. Refer to this document for more information regarding licenses and how you can enable on the router:

http://www.cisco.com/en/US/prod/collateral/routers/ps10616/white_paper_c11_556985_ps10537_Products_White_Paper.html

Regards,

Subeh

View solution in original post

3 Replies 3

Subeh Sharma
Level 1
Level 1

Hi Wajid,

IP SLA on ISR G2 platforms like your 1900 require Data K9 licence. Can you paste the output of show version with the non-working IOS image here?

Regards,

Subeh

IMCL-PUN01-RTR008#show ver

IMCL-PUN01-RTR008#show version

Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.2(4)M1, REL

EASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Thu 26-Jul-12 19:34 by prod_rel_team

ROM: System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)

IMCL-PUN01-RTR008 uptime is 3 weeks, 5 days, 23 hours, 42 minutes

System returned to ROM by power-on

System image file is "usbflash0:c1900-universalk9-mz.SPA.152-4.M1.bin"

Last reload type: Normal Reload

Last reload reason: power-on

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco CISCO1921/K9 (revision 1.0) with 487424K/36864K bytes of memory.

Processor board ID FGL164723XU

2 FastEthernet interfaces

2 Gigabit Ethernet interfaces

1 terminal line

DRAM configuration is 64 bits wide with parity disabled.

255K bytes of non-volatile configuration memory.

249840K bytes of USB Flash usbflash0 (Read/Write)

License Info:

License UDI:

-------------------------------------------------

Device#   PID                   SN

-------------------------------------------------

*0        CISCO1921/K9          FGL164723XU

Technology Package License Information for Module:'c1900'

-----------------------------------------------------------------

Technology    Technology-package           Technology-package

              Current       Type           Next reboot

------------------------------------------------------------------

ipbase        ipbasek9      Permanent      ipbasek9

data          None          None           None

data          None          None           None

Configuration register is 0x2102

Wajid,

As expected, you don't have Data k9 license installed.

-------------------------------------------------

Device#   PID                   SN

-------------------------------------------------

*0        CISCO1921/K9          FGL164723XU

Technology Package License Information for Module:'c1900'

-----------------------------------------------------------------

Technology    Technology-package           Technology-package

              Current       Type           Next reboot

------------------------------------------------------------------

ipbase        ipbasek9      Permanent      ipbasek9

data          None          None           None

data          None          None           None

You can compare this output with the release in which you are able to get IP SLA configuration. Refer to this document for more information regarding licenses and how you can enable on the router:

http://www.cisco.com/en/US/prod/collateral/routers/ps10616/white_paper_c11_556985_ps10537_Products_White_Paper.html

Regards,

Subeh

Review Cisco Networking for a $25 gift card