IR829 Stuck in rommon -2

John.Barbour · ‎05-22-2017

I have a IR829 that is stuck in rommon -2

When I try to boot flash:ir800-universalk9-mz.SPA.156-3.M I get the following reading.

rommon-2> boot flash:ir800-universalk9-mz.SPA.156-3.M

Booting image: flash:ir800-universalk9-mz.SPA.156-3.M.... [Multiboot-elf, <0x

110000:0x9d764bc:0x4a85f8>, shtab=0xa32f2f8[csvds]:/ir800-universalk9-mz.SPA.15

6-3.M... , entry=0x1100b0]

[CU:0]

Jumps to: 0x1100b0

Smart Init is enabled

smart init is sizing iomem

TYPE MEMORY_REQ

Onboard devices &

buffer pools 0x03644000

-----------------------------------------------

TOTAL: 0x03644000

Rounded IOMEM up to: 55MB.

Using 12 percent iomem. [55MB/448MB]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco IOS Software, ir800 Software (ir800-UNIVERSALK9-M), Version 15.6(3)M, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Compiled Thu 28-Jul-16 04:10 by prod_rel_team

<3> [691.241976] IOAPIC: IOAPIC 1 initialized, implementation version 32

<3> [691.241976] <E1000> e1000_device_init: initialized E1000 device

<6> PCI: Initializing

<6> PCI: Resetting devices

<6> PCI: Resetting device QAT15 (00:0b.0)

<6> PCI: Resetting device SMBUS1 (00:13.0)

<6> PCI: Resetting device ETH0 (00:14.0)

<6> PCI: Resetting device ETH1 (00:14.1)

<6> PCI: Resetting device ETH2 (00:14.2)

<6> PCI: Resetting device ETH3 (00:14.3)

<6> PCI: Finished resetting devices

<6> PCI: Restoring devices

<6> PCI: Finished Initializing

IOS image signature verification was: FAILURE

Autoboot string flash:ir800-universalk9-mz.SPA.156-3.M,12;

Failed to boot, skip first flash:ir800-universalk9-mz.SPA.156-3.M,12;

Are their any options or is this an RMA.

Thanks,

John

Leo Laohoo · ‎05-22-2017

IOS image signature verification was: FAILURE

Autoboot string flash:ir800-universalk9-mz.SPA.156-3.M,12;

IOS is corrupt. Download the IOS again from the Cisco website.

John.Barbour · ‎05-22-2017

Thank you Leo.

That is what I was thinking, but I wanted to make sure. I did see on Cisco.com that the 829 has this issue and may have to be a RMA. I will give this a try.

Spooster IT Services · ‎05-22-2017

"IOS image signature verification was: FAILURE"? Two reasons:

1. The IOS is corrupt; and
2. An IOS bug.

Try to load with other IOS

Is there any other IOS available in flash?

15.6 version is the new stuff i would recommend to use 15.5.

Spooster IT Services Team

John.Barbour · ‎05-23-2017

rommon-2> dir

flash:

MC7354_1102037_9903214_05.05.58.00_00_ATT_005.009_000

ir800-universalk9-mz.SPA.156-3.M

MC735X_9999999_9902574_05.05.58.00_00_GENNA_005.025_000

managed

eem

rommon-2>

this is what is showing in the directory.

The pickle is that this is a loaner from cisco for us to testing, and I cannot get the IOS from cisco.com because we have not officially purchased these yet.