04-09-2007 03:29 AM - edited 03-03-2019 04:28 PM
Hi,
Can any one suggest me for the ISDN lab setup.
Basically I want to set up a lab ,in which to show the ISDN dial back up to the participants.
Any ISDN demo kit which can be used in a lab environment.
Please suggest.
Thanks and Regards,
S.Venkataraman.
04-09-2007 03:39 AM
The problem is that you need one of these mini-BRI switches that use to connect BRI's and make calls. It is necessary because the BRI interface, data version, cannot be connected back-to-back. I do not rememeber any brand name now but a google search should help.
Hope this helps, please rate all useful posts!
04-09-2007 03:43 AM
Hi
The cisco routers you can use are :
(1)800 series (801/803)
(2)2800 series (2801 and so on) with one WIC-1B-S/T.
If you can go for second hand on ebay, get 2503 or 1721 with BRI card.
You can choose any two of above(whiever suits your pocket)
And get hold of an ISDN simulator with at least two S/T ports.For Eg BlackBox.
This will do for you.
Regards
JD
04-09-2007 09:09 PM
Hi JD,
Thanks
04-09-2007 11:25 PM
Hi
Pls rate the posts if they have helped you.Also Check on "Resloveld my issue" checkbox if that had solve ur problem.
Regards
JD
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide