12-31-2019 02:11 AM
Hi all,
we are looking for replace our Mikrotik routers to something more rock solid.
We are running Routing, NAT, Traffic Shaping and firewalling (or static ARP), DHCP and PPPoE concentrator on mikrotiks now.
Is there any cisco HW based solution that can handle all of this without any problem?
The up/downlons are 10gig.
The HW must handle 10+10 Gig connectivity for 10 000 customerst that have 10,30,50,100,300,1000 gig packages.
Any good idea?
12-31-2019 02:20 AM
12-31-2019 02:44 AM
Hello,
--> The HW must handle 10+10 Gig connectivity for 10 000 customerst that have 10,30,50,100,300,1000 gig packages
Over how many sites are these users distributed, and how are they currently connected ?
12-31-2019 02:58 AM
Hello
Review ciscos router selector - here
12-31-2019 02:59 AM
The HW must handle 10+10 Gig connectivity for 10 000 customerst that have 10,30,50,100,300,1000 gig packages.
BB - This looks more of Residential or commercial ISP typical Setup. Are you looking to Grow more or maximum users 10K ?
This require more undersrtanding of your business plan, rather a thorugh a single box in the network to work.
This required different segment to do different level of service you looking, cisco has DSL / DSLAM Solution all in one, but what cost important here.
Suggestion below :
1. make a budget plan.
2. you would like to buy all in one solution - or stage level.
3. contact local cisco Partner / SE so they can sugget best Bill of meterial (rather surpises of missing items).
Some of the service you can build your own to save cost ( again what kind of expertise available in house also important).
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide