05-04-2010 01:10 PM - edited 03-04-2019 08:22 AM
Hello folks,
I have a 2821 cisco router with two Gigabyte ethernet interfaces. I have adquired a 2-Port Fast Ethernet Hight-Speed WIC for Cisco Integrated Services Routers. I have followed the instructions to install this slot, I have choosed the 0 slot, I have tested it in other slot and I get the same result. When I power up the router, the all port leds is in green and when I issue the command "Show ip interface brief", I don't see the Fast Ethernet Interface in the interface list.
Is possible that the WIC is damaged or broken?
Could somebody help me, please?
Thanks in advance!!.
Solved! Go to Solution.
05-05-2010 12:08 AM
Hi,
I have been recently checking the image requirement for this module and it seems the module requires 12.4(15T) as minimum version.I have also seen it wokring properly on 12.4(20)T.
Regards,
Bhavesh
05-04-2010 01:31 PM
Elias
What IOS are you running ?
Jon
05-04-2010 01:58 PM
Hi Jon,
This is the system image file: c2800nm-advipservicesk9-mz.124-9.T7.bin
Thanks by your response!!
05-05-2010 12:08 AM
Hi,
I have been recently checking the image requirement for this module and it seems the module requires 12.4(15T) as minimum version.I have also seen it wokring properly on 12.4(20)T.
Regards,
Bhavesh
05-05-2010 12:27 AM
Bufff!!
Now I have a great problem because I haven't support contract.
Thanks
05-05-2010 09:43 AM
Do not try to do professional networking alone, engage a reputable consultant or cisco partner, and they will solve all your problems easily.
05-05-2010 09:51 AM
Hi Bebilacqua,
Not is sufficient with an ccna, ccnp in my enterprise?.
Greetings!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide