Routing

Hi Friends,I want to check how many users(ip's) are accessing one particular ip.Eg 10.xx.xx.xxHow many ip's are currently accessing 10.xx.xx.xx?Thanks,Tamilvanan.S

I just got a replacement 2901 due to a bad power supply and while configuring it to be put into production I've come across an inability to enter the ip sla 1 command.  I'm given a very limited amount of options, when I was expecting to be able to en...

hi,we have in our factory old hp-workstations, which boot from the network and catch their boot-image from an server. it works fine, when client and server are in the same ip-segment. when we set the client in a differnt ip-segment, nothing works. i ...

Greetings, im looking at configuring an 1841 for PBR with Object tracking for two circuits, one SDSL and one DSL.I want to send web traffic via the DSL circuit and all other traffic down the SDSL circuit.Ive had a look at the following guide and all ...

We are using 3750 & 2960 switches in our network. The network is in star configuration with 3750 at the center and 2960 as the spokes. Each 2960 is in different VLAN & the internal network (hosts) of 3750 is in separate VLAN. EIGRP routing is impleme...

Hi,does anybody know how long does it take a Cisco router to detect a power failure?Would it survive a 5ms power outage during a UPS maintenence without a reboot, e.g.?Thanks,Milan

Hallo,after some years I got problem saving running conf to start conf (https://supportforums.cisco.com/docs/DOC-5157;jsessionid=2152644DDAB958EC34651BC608967DC6.node0 ) when I hit yes after reload router not load full config.so I make boot conf flas...

Can someone pls explain to me what is the purpose of port numbers 2000, 3000, 4000? For example, I know if I use port 2097 (2000 + 97) using the example below, I can do a reverse telnet with serial3/0 interface. Are the port numbers (2000/3000/4000) ...

I have 2 cisco switches model - catalyst 2950 series, i recently had an network issue regarding an ip conflict with one of my member servers, after being on the phone with microsoft support for 6 days, we were able to resolve the problem by locating ...

Hi all,Our HQ is connected to the branch offices with at least 10xE1 (all P2P links). They are used to connect the PBXs at the moment.We want to add the data service, what router model and interface cards should we use?Based on my search we need at l...

Hi All,We intended to upgrade 10G network from existing 7606 Switch.There're 2 modules, WS-X6704-10GE and WS-X6708-10G-3CXL/WS-X6708-10G-3CXL3C.if we select WS-X6708-10G-3CXL/WS-X6708-10G-3CXL3C... all ports using would consume 80GB logically, but 40...