07-25-2006 08:19 PM - edited 03-03-2019 01:27 PM
Below is the pasted configuration of one router, problem is route map not working. it is not doing source based routing. Packets from specific source are (LAN pool) are taking default route only.
Any idea or i am missing something ?
!
ip cef
!
!
interface Loopback0
no ip address
!
interface Serial0
ip address 61.95.141.122 255.255.255.252
!
interface Serial1
ip address 203.187.240.254 255.255.255.252
!
interface FastEthernet0
ip address 203.101.119.209 255.255.255.240 secondary
ip address 203.187.240.1 255.255.255.240 secondary
ip address 203.101.81.33 255.255.255.248
ip policy route-map Iqara
speed auto
!
ip classless
ip route 0.0.0.0 0.0.0.0 61.95.141.121
ip route 203.187.192.12 255.255.255.255 203.187.240.253
ip route 203.187.192.15 255.255.255.255 203.187.240.253
no ip http server
!
!
access-list 110 permit ip host 203.187.240.2 any
access-list 110 permit ip 203.187.240.0 0.0.0.15 any
access-list 191 permit icmp any any echo
access-list 191 permit icmp any any echo-reply
route-map Iqara permit 20
match ip address 110
set ip next-hop 203.187.240.253
!
07-25-2006 08:47 PM
Hello,
What happens when you issue a show ip access-list 110
Do you see the counters incrementing for the access list when traffic passes over the ethernet interface?
Thanks
Michael
07-25-2006 11:18 PM
yes, counters increase. But not on that rate on which packets are flowing i.e. if i try 100 times,access list shows 20 only.
07-26-2006 12:15 AM
Can you please provide the "sh ip route" ?
07-26-2006 12:14 AM
try to debug ip packet 110, past the output .
07-26-2006 12:54 AM
Hi,
try "set interface s1"
for more infos:
HTH
Andrea
07-26-2006 01:31 AM
Below is the sh ip route output.
Gateway of last resort is 61.95.141.121 to network 0.0.0.0
203.101.81.0/29 is subnetted, 1 subnets
C 203.101.81.32 is directly connected, FastEthernet0
203.101.119.0/28 is subnetted, 1 subnets
C 203.101.119.208 is directly connected, FastEthernet0
203.187.240.0/24 is variably subnetted, 2 subnets, 2 masks
C 203.187.240.252/30 is directly connected, Serial1
C 203.187.240.0/28 is directly connected, FastEthernet0
203.187.192.0/32 is subnetted, 2 subnets
S 203.187.192.12 [1/0] via 203.187.240.253
S 203.187.192.15 [1/0] via 203.187.240.253
61.0.0.0/30 is subnetted, 1 subnets
C 61.95.141.120 is directly connected, Serial0
S* 0.0.0.0/0 [1/0] via 61.95.141.121
07-26-2006 02:07 AM
It might be worthing doing a 'debug ip policy' to see what exactly is happening.
Paresh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide