switch, router and vlans

[Manish Manwal]

hi all,  i had set two users in cisco 3850 and 3650 -i switch. one is admin with privilege 15 and another is user with privilege 7.
but when we login from admin user it is not asking for enable password, it directly goes to privilege exc mode. i have set enable secret level 15 but its can' t work. so pleas guide me how set enable password for user who has privilege 15.

[Deepak Kumar]

Hi,

Share your Line VTY configuration. 

Regards,

Deepak Kumar

[Manish Manwal]

mr deepak

username user password 7 106
username Admin privilege 15 password 7 0123565B4846

ine con 0
 login local
 stopbits 1
line aux 0
 stopbits 1
line vty 0 4
 login local
 transport input ssh
line vty 5 15
 login

[Deepak Kumar]

Hi,

This is becuase " Level 15 is the level of access permitted by theenable password."

Regards,

Deepak Kumar

[Manish Manwal]

sir, how i can set enable password for that.

how to stop admin to goes directly to privilege exec.

[Deepak Kumar]

Hi,

Try with below configuration.

aaa new-model
!
!
aaa authentication login default group radius local

!

line vty 0 4

no login local

login authentication default

!

!

try this command along with your username and password.

Regards,

Deepak Kumar

[Manish Manwal]

I have try this but it cant work.

[Diana Karolina Rojas]

Hello!

Can you try using this commands?

S(config)#line vty 0 15

S(config-line)#login local

S(config-line)#priviledge level 0

Best Regards,

[Manish Manwal]

Mam i have try this also. Its not working mam.
Thanks and Regards
Manish Manwal
9410971954

[Deepak Kumar]

Hi,

I tested in my lab and it is working. Please share "Show Version" and full running configuration of the router.

Regards,

Deepak Kumar

[Manish Manwal]

is it possible to done this without aaa model.

becouse when we crate aaa, it prevent me to login in my switch.

[Rajesh Hirani]

It is what "Deepak" said. The enable mode gives you right to "level 15". If you try logging in the EXEC mode and check level; you will see "7 or 15" (depending on the credential you use)!! 

Cheers 

[Manish Manwal]

hey mr. rajesh;

 i think you din't get my question. please read this again. if you din't get this, tell me, i am try it an easy language. then please reply helpful suggestion. thank you.

[Rajesh Hirani]

Sorry Manish. May be I misunderstood what you are asking. 

[Manish Manwal]

hey Mr. rajesh;

 i think you didn't get my question. please read this again. if you didn't get this, tell me, i am try it an easy language. then please reply helpful suggestion. thank you.