cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1001
Views
4
Helpful
7
Replies

%SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure con

andresdavid
Level 1
Level 1

Hello,  please help me, I posted the whole file with today's logs, I woke up with the system stopped

log:  %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
*Mar 8 08:45:49.219: SP: SP: Currently running ROMMON from S (Gold) region
*Mar 8 08:46:00.271: %MCAST-SP-6-ETRACK_STATS_LIMIT_EXCEEDED: Number of entries in IGMP snooping explicit-tracking statistics has exceeded the permanent threshold (0)
*Mar 8 08:46:00.271: %MCAST-SP-6-ETRACK_STATS_LIMIT_EXCEEDED: Number of entries in IGMP snooping explicit-tracking statistics has exceeded the maximum limit (0)
*Mar 8 08:46:00.307: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for type vlan. The Bridge IDs of all active STP instances have been updated, which might change the spanning tree topology
*Mar 8 08:46:05.003: %SW_VLAN-SP-6-VTP_DOMAIN_NAME_CHG: VTP domain name changed to NETWORK.
*Mar 8 08:46:09.032: %SYS-SP-5-RESTART: System restarted --
Cisco IOS Software, s72033_sp Software (s72033_sp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SXI5, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Sat 23-Oct-10 02:08 by prod_rel_team
*Mar 8 08:46:09.396: %SYS-SP-6-BOOTTIME: Time taken to reboot after reload = 1498 seconds
*Mar 8 08:46:09: %OIR-SP-6-INSPS: Power supply inserted in slot 1
*Mar 8 08:46:09: %OIR-SP-6-INSPS: Power supply inserted in slot 2
*Mar 8 10:46:09: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 8 10:46:10: %LINEPROTO-5-UPDOWN: Line protocol on Interface Control Plane Interface, changed state to up
*Mar 8 10:46:10: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 10.100.100.6 port 514 started - CLI initiated
*Mar 8 10:46:10: %LINEPROTO-5-UPDOWN: Line protocol on Interface VRF_0_vlan1017, changed state to up
*Mar 8 08:46:09: %C6KPWR-SP-4-PSOK: power supply 2 turned on.
*Mar 8 10:46:11: %SNMP-5-CHASSISALARM: Chassis Alarm Trap: tmpAlarm(OFF), minorAlarm(ON), and/or majorAlarm(OFF)
*Mar 8 10:46:11: %SNMP-5-COLDSTART: SNMP agent on host bb01.network.ro is undergoing a cold start
*Mar 8 10:46:16: %FABRIC-SP-5-CLEAR_BLOCK: Clear block option is off for the fabric in slot 5.
*Mar 8 10:46:16: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Module in slot 5 became active.
*Mar 8 10:46:17: %DIAG-SP-6-RUN_MINIMUM: Module 5: Running Minimal Diagnostics...
*Mar 8 10:46:29: %LINK-3-UPDOWN: Interface GigabitEthernet5/1, changed state to down
*Mar 8 10:46:29: %LINK-3-UPDOWN: Interface GigabitEthernet5/2, changed state to down
*Mar 8 10:46:29: %SNMP-5-MODULETRAP: Module 5 [Up] Trap

 

Routing

1 Accepted Solution

Accepted Solutions

unfortunately - I was suggesting

12.2.x. SY for Sup2T  and 6T

you have Sup 720 (I do not see any image available to download)

If you looking to keep this chassis some more time in the network - use refurbished cards

Sup2T or Sup6T 

to breath some more time.

 

Cat 6K end of Life 

you need to look replace models

Cat 9K

moving forward.

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

View solution in original post

7 Replies 7

balaji.bandi
Hall of Fame
Hall of Fame

Can you provide below information :

show version (full)

show modules

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

andresdavid
Level 1
Level 1

balaji.bandi thank you for your reply

show version
Cisco IOS Software, s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SXI5, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Sat 23-Oct-10 01:30 by prod_rel_team

ROM: System Bootstrap, Version 12.2(17r)S2, RELEASE SOFTWARE (fc1)

bb01.network.ro uptime is 2 hours, 54 minutes
Uptime for this control processor is 2 hours, 54 minutes
Time since bb01.network.ro switched to active is 2 hours, 52 minutes
System returned to ROM by power cycle at 18:11:38 GMT Wed Mar 8 2023 (SP by power on)
System restarted at 18:36:02 GMT Wed Mar 8 2023
System image file is "disk0:s72033-advipservicesk9_wan-mz.122-33.SXI5.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C6509-E (R7000) processor (revision 1.2) with 983008K/65536K bytes of memory.
Processor board ID SMC1028001C
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from power-on
70 Virtual Ethernet interfaces
98 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.

65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102




and  modules:




show module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAL13484TNB
4 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL1310LJL2
5 2 Supervisor Engine 720 (Active) WS-SUP720-3BXL SAD0945029J
7 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAL09073NVX
8 4 CEF720 4 port 10-Gigabit Ethernet WS-X6704-10GE SAL08496Y7R

Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 c47d.4f0b.eec8 to c47d.4f0b.eedf 4.3 12.2(18r)S1 12.2(33)SXI5 Ok
4 0024.c4a9.0dd0 to 0024.c4a9.0dff 3.0 12.2(18r)S1 12.2(33)SXI5 Ok
5 0011.9202.4504 to 0011.9202.4507 4.3 8.1(3) 12.2(33)SXI5 Ok
7 0013.1972.1b1c to 0013.1972.1b33 2.2 12.2(14r)S5 12.2(33)SXI5 Ok
8 0012.7f69.ead4 to 0012.7f69.ead7 2.0 12.2(14r)S5 12.2(33)SXI5 Ok

Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 Centralized Forwarding Card WS-F6700-CFC SAL13484YQD 4.1 Ok
4 Distributed Forwarding Card WS-F6700-DFC3BXL SAD09110DP7 3.4 Ok
5 Policy Feature Card 3 WS-F6K-PFC3BXL SAD0945006F 1.6 Ok
5 MSFC3 Daughterboard WS-SUP720 SAD094506LZ 2.3 Ok
7 Centralized Forwarding Card WS-F6700-CFC SAL09020AZR 2.0 Ok
8 Distributed Forwarding Card WS-F6700-DFC3BXL SAL1033Y52W 5.2 Ok

Mod Online Diag Status
---- -------------------
1 Pass
4 Pass
5 Pass
7 Pass
8 Pass

These kit was end of life and support some time back.

at this stage we are not sure what happend - my guess are below .

Last reset from power-on

1. due to long uptime, system may have crashed (look dir - see any crash files)

2. show cpu (check any high CPU at the time of reload if you have any NMS)

3. or high memory use

there is new code last on 12.2.(55?) i think - so upgrade to that code if you still looking to keep this kit.

Most other suggestion, upgrade to latest model to minimise the risk of business loss of services.

Switch come back normal and passed all the tests, so i do not see any issue for now, but keep monitor.

by any chance is this part of VSS ?

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

andresdavid
Level 1
Level 1
I will try to upgrade to 12.2.55 , 

by any chance is this part of VSS ?: no, not part of VSS.

Thanks for all the help.

Sure let us know how it goes and collect more logs (by sending them to Syslog server)

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

andresdavid
Level 1
Level 1

can you help me to download that version 12.2.55 ? 

I can't find it anywhere

unfortunately - I was suggesting

12.2.x. SY for Sup2T  and 6T

you have Sup 720 (I do not see any image available to download)

If you looking to keep this chassis some more time in the network - use refurbished cards

Sup2T or Sup6T 

to breath some more time.

 

Cat 6K end of Life 

you need to look replace models

Cat 9K

moving forward.

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Review Cisco Networking for a $25 gift card