Hello, I tried to setup a topology where controllers are deployed on-prem behind vEdge. vEdge router is connected to public Internet and MPLS on VPN0 and on VPN99 to the firewall over public subnet, ie. 1.1.1.0/24. On firewall I have configured 1:1 N...
Forum Posts
Hi All, plannign to deploy sdwan for around 100 sites with cat8300 routers at each site. can you help me with the max number of tunnels supported . Regards, Avdhesh
Hello,I have a cEdge router with a couple static routes that are re-distrubuted to the rest of the networkAlso I have a default static route "ip route vrf 1 0.0.0.0 0.0.0.0 10.xx.xx.xx" and i do not want this route to be re-distributed.How can i achi...
Hi SD-WAN Community,I'm new to SD-WAN and ask for support to find the best suitable APIs to access KPIs to measures bandwidth consumption for each connectivity lines (fiber optics, xDSL, ..) and their health status for both Meraki and Viptela platfor...
Hello Community, I was wondering how many colors a cEdges can support on a single device. I seem to recall a maximunm of 8 ?!Thank you in advance.
Resolved! cli iperf test on ios-xe
Hi, on the Vmanage I can start a speed test beetwen ios-xe devices, how can I do it through cli like as on a vedge device (tool iperf)?
Hi, Does anyone know why the "bw_up" and "bw_down" in the "/dataservice/statistics/interface" API not synced with the value set in the VPN Interface template? Btw, I'm using vManage version 20.6.3 and IOS-XE version 17.04. Thanks, Ardi
How to failover between WAN connections in Cisco Vipetala SDWAN
Hi, I've been using the SD-Wan API and it worked with no problems. But, when I'm trying to do the logout I'm not able to get the code 302. I think it has to do with the random-number that appears in the code snippet. anyone knows what am I suppose to...
Kindly tell your insights about SD-WAN.
HI Experts ,At present, our branch site has servers in the DMZ area, which need to be accessed through internal and external networks. Can Cisco SDWAN be implemented? If it can be achieved, how can it be achieved?Demilitarized zone (DMZ): The DMZ pro...
while doing troubleshooting ,There is service VPN 10 and VPN 0 is transport VPN at one site but when we try to reach other site which has VPN 10 also then we can ping with no packet drop through command--ping vpn 10 x.x.x.x as here traffic is going v...
Resolved! cEdge certificate installation error
Hello,I am trying to install a cert on a lab cEdge device and get the below error.LAB-IDA-RTR-01#$ware sdwan certificate install bootflash:ROOTCA.pem Installing certificate via VPN 0 Copying ... /bootflash/ROOTCA.pem via VPN 0 System organization nam...
Command i.e. used to check syslog in Vedge ,ISR,ASR in Viptela sdwan and how can we check syslog in Vmanage
Hi,the SD-WAN vManage API (version 20.3) provides values for the average utilization of the edge TLOCs, e.g.dataservice/device/tlocutil/detail?util=10mbps100mbpsCan anybody tell us how to interpret the "average" value? It probably is in "Mbps", but o...
