Hi,i lost my username and password for neo4j databasechanged it from default credentials neo4j/password i now i cant remember which is new password.what i can do? only tac can help it?is there any way to find at least the username?Regards,Hugo
Forum Posts
Question on TLOC preference. Quick diagram attached.If private1 is set to higher TLOC preference, can it cause issue routing to sites that only have public-internet?For example:R1 should always route traffic across private1 to R3 and vice-versa.R1 sh...
Hello. I always get useful information from community. Can I configure "bandwidth" command for cEdge router via template ? Ex) Interface GigabitEthernet1 bandwidth 5000 # Possible to config this through device/feature templa...
I am using Cisco SD-WAN IOS-XE ISR4331 version 17.6.5.Could you please share the procedure to install the OS from ROMMON?For some reason, the router is referencing the OS file instead of the packages.conf file to boot.I would like to perform an OS up...
HiI want to select the secondary path instead of Primary path for specific subnet 20.0.10.0/24 for our SDWAN Fabric.Scenario : From Site A to Site B preferred path for all the traffic is through Primary Link which is reaching on 40.1.1.0/24 which is ...
Hi, can you share with you experience when you bump into error DCONFAIL? I suppose that my error connect with Firewall's provider, but I have two isp and it's too difficult to troubleshoot one of them, for example when I try to use tracert with sourc...
Hi all, i got confused with these Cisco SDWAN preferences. what is the difference between the TLOC PREF, IPSEC PREF and the OMP PREF. Thank youNaga
Hello, We are looking to deploy SD-WAN for the IR1101-K9 and would like to manage it through the Cloud. However, unlike other ISR models that offer both DNA-P-T0... and DNA-C-T0... options, we only see one license option for the IR1101-K9: L-IR-DNA-T...
physically on the equipment, the following alarm is detected in the platform, the following error is observed I have searched and found no related information.could you guide me to know the reason for the alarm?
Hi, please could I check to see if anyone knows there is any access to be able to view the logs from attempted vManage webhooks (to see whether there were any that failed to go through). I can't find anything in the interface to show this, but I was ...
I am testing a Viptela to IOS-XE upgrade on an ISR1100-4G (20.9.5.1 > 17.9.4a). It's been well over an hour now since I started the upgrade? How long should it take? I am following this process: https://www.cisco.com/c/en/us/support/docs/routers/sd-w...
Hi, I am trying to build my own Cisco ACI LAB and i need help/advice: I have already one spine and two leafs, and also 2 DELL servers in cluster in Vcenter The remaining issue is how do i solve the APIC part. I understand that i can't h...
Hi, I have configured an External Syslog server for security container in a cedge router, but it seems that logs are not sending to the Syslog server. I can see many logs are generating by the security container, but the question is, How can I make s...
I would like to upgrade our SDWAN environment to code that supports XE SD-WAN code. We have Vedge 2000 head ends and a mixture of Vedge 1000, 100-4G and 1100-6G boxes at 140 sites.Can I upgrade the Vedge 2000's to code that supports XE SD-WAN, or do...
Can we setup an SNMP trap when an SDWAN router is near its maximum tunnel count e.g. C822-1N-4T has a maximum overlay tunnel limit of 2500 tunnels. Does device generate an SNMP trap when it is nearing that limit?
