The Cisco ASA provides advanced stateful firewall and VPN concentrator functionality. It has long been the industry standard for firewalls. For more information on this product, seehttp://www.cisco.com/go/asa.
Firepower Threat Defense provides unified next-generation firewall and next-generation IPS functionality. In addition to the IPS features available on Firepower Software models, firewall and platform features include Site-to-Site VPN, robust routing, NAT, clustering, and other optimizations in application visibility and access control.Firepower Threat Defensealso supports Advanced Malware Protection (AMP) and URL filtering. For more information on this product, seehttp://www.cisco.com/go/ngfw.
Cisco's Migration Tool allows you to convert specific features in an ASA configuration to the equivalent features in anFirepower Threat Defenseconfiguration using the easy to use wizard based Migration Tool. Download the Migration Tool here . Release notes here.
I'm reaching out to see if anyone knows how to configure a Cisco ASA to send RADIUS attribute 8 FRAMED-IP-ADDRESS to ISE. I would like this communicated to ISE so that it receives a VPN'd users IP address. Thanks.
Hi Guys, just want to double check with you. In FTD, I have 2 subnet and if I need to have intervlan for those 2 VLAN, do I still need to configure an identity NAT or any NAT?My target is doing intervlan routing between the 2 VLAN without any IP change.th...
Hi,I set up DVTI in EVE with 2 routers. HUB------SPOKE.Virtual-template is not showing up/down. Instead of up/up.Checked Phase1 and Phase2 parameters but not sure where I made a mistake.Attached diagram and configuration.Please take a look.
I tested using both Cisco ISE 2.4 (patch 9) and Cisco ISE 2.6 (patch 1). I have a user who successfully authenticated via RADIUS against ISE. Under ISE, Operations > Live Logs (and Live sessions), I see the user authenticated. After the accounting requ...