cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Conversion tool Juniper (ScreenOS) to Cisco ASA

21319
Views
10
Helpful
20
Comments
Anand Kanani
Cisco Employee

Cisco has recently opened up a self-service tool to convert Juniper ScreenOS configurations to Cisco ASA configs.

https://fwmig.cisco.com/

It is open to all the users registered on the Cisco website.

Try it out and let us know your feedback.

Thanks

Anand

20 Comments
mimomhaz333_2
Beginner

Is there is any tool which offer conversion from SRX to ASA

Anand Kanani
Cisco Employee

This tool now supports the conversion of CheckPoint Firewall configurations to Cisco ASA.

https://supportforums.cisco.com/community/netpro/security/firewall/blog/2013/12/19/conversion-tool--checkpoint-fw-to-cisco-asa

Patrick Taylor
Beginner

I tried to run the utility for our Netscreen 208s and got this error:


##################################################################
  Juniper ScreenOS to Cisco ASA Config Conversion Tool - ver 4.0
##################################################################

Task Started at 2014-02-21 15:54:01 UTC on the Server

STEP [1/*] Reading the Config File
STEP [2/*] Renaming Trust/Untrust to Inside/Outside Respectively
STEP [3/*] Defining Disclaimer
STEP [4/*] Checking VSYS Existence
STEP [5/33] Finding Basic Information
STEP [6/33] Finding VRs and Interfaces
STEP [7/33] Creating Interfaces
STEP [8/33] Creating Routes
STEP [9/33] Creating Networks - part 1 of 2
STEP [10/33] Creating Networkgroups - part 1 of 2
STEP [11/33] Checking Network Name Conflicts
STEP [12/33] Remove Unaccepted Characters From Network Names
STEP [13/33] Creating Networks - part 2 of 2
STEP [14/33] Creating Networkgroups - part 2 of 2
STEP [15/33] Creating Services - part 1 of 2
STEP [16/33] Creating Servicegroups - part 1 of 2
STEP [17/33] Remove Unaccepted Characters From Service Names
STEP [18/33] Creating Policies

SOME ERROR HAPPENED WHILE CONVERSION. THAT IS ALL I CAN SAY HERE
.
Conversion Task had some issues at 2014-02-21 15:54:05 UTC on the Server

Anyone else have this issue?

Anand Kanani
Cisco Employee

Hi Patrick

I trust that your query has been resolved over the unicast email on the mailer fwmig-feedback@cisco.com

Since it was specific to your configuration, I'm not revealing any details here.

Regards

Anand

derict
Beginner

is this tools still available? I can't seems to access/load it ...

Anand Kanani
Cisco Employee

Hi Direct

There was a maintenance activity going on. It is up now. Sorry for the inconvenience.

Regards!

ankjain2
Beginner

Is there a tool which will convert configs from JunOS to ASA. We are moving from SRX650 to ASA and the JunOS config is extremely long and complex.

Thanks.

Hi,

Been trying to access to the link but got proxy error. Anyone facing the same issue?

 

Regards

Zul

Anand Kanani
Cisco Employee

Hi Zul

Pls try now. The system was under maintenance. It is up now.

Regards

Anand

sasabri01
Beginner

Hi 

appreciate  if u can help me to convert juniper router configuration to cisco router configuration.

 

araghav01
Beginner

I am converting check point config to cisco asa and did make sure that all 8 files were included in zip attachment but tool kept throwing error "The Uploaded Config does not contain all the 8 files as mentioned in the Configuration Collection Procedure". 

Tool doesn't work.  

thanks

/Amit

araghav01
Beginner

It appears that I had to zip files by selecting all and then right click on actual files to zip. Zipping whole folder will not work. there is a note also somewhere. 

slicerpro
Beginner

This is the conversion tool for checkpoints, where is the tool for ScreenOs?

slicerpro
Beginner

Scratch that. There is a button for ScreenOS. This tool has made my job that much easier. I was looking at converting +7000 lines from ScreenOs to Cisco ASA. Now I don't have to bill anyone for the overtime. Did I say I looove this tool ? Keep up the good work team!

Shera
Beginner

Hi Anand,

link https://fwmig.cisco.com/ shows

"

Page Unavailable - Server Unavailable Error 503"

is the service down?

Content for Community-Ad

This widget could not be displayed.